Waveshare 34522 - Core2021 HF Dual-Band LoRa Module, Based on LR2021 Transceiver, Supports Sub-GHz, 2.4GHz And 1.5~2.5GHz Frequency Bands, Low-power And Multi-protocol IoT LoRaWAN...

The Kitronik Round Side Illumination LED Module is a pre-built board, designed for low-power lighting displays, such as desk lamps, accent lights, and illuminated signs. It has been designed such...

This two channel relay module is ideal for switching low voltage AC and DC loads. It is compatible with 3.3V and 5V microcontroller boards such as Arduino, Raspberry Pi Pico and ESP32. Features 2...

This module combines RK09K1130D62 clear shaft linear potentiometer with a skinny NeoPixel. Each board comes assembled with a NeoPixel soldered beneath the potentiometer so it lights up the shaft for...

The Adafruit Constant Current Boost Converter for LEDs makes driving LEDs easy, whether they're in series or parallel - with a chip that can generate up to 40V and 400mA from 3~5V input. Unlike most...

Pimoroni PIM770 - Add a hardware volume control dial to Picade Max USB Audio. Picade Max Encoder is a small board with a digital rotary encoder conveniently pre-attached. Connect it up to the...

8086 Consultancy - USB-C/PWR Splitter, no Barrel The adaptor allows the Raspberry Pi 4/5 to be used with a Pi USB-C power supply whilst allowing access to USB 2 OTG data over a separate USB-C...

Pimoroni PIM769 - This super-smart Bosch sensor measures temperature, pressure and humidity precisely. It also has an AI-enhanced gas scanner function. Like previous sensors in the BME6XX series,...

Pimoroni PIM730 - Add 2.4GHz wireless and Bluetooth functionality to an existing project with this handy breakout featuring Raspberry Pi's RM2 module. RM2 uses the same two-in-one wireless and...

Adafruit 3296 - DS1307 Real Time Clock Assembled Breakout Board This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is...

Adafruit 3072 - RFM95W LoRa Radio Transceiver Breakout - 868 or 915 MHz - RadioFruit "You see, wire telegraph is a kind of a very, very long cat.  You pull his tail in New York and his head is...

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or...

Pimoroni PIM442 - 11x7 LED Matrix Breakout - A tiny, tightly-packed matrix of 77 individually-controllable bright white LEDs. Ideal for scrolling text, animations, bar graphs, or just general...

We're always on the look out for better ways to make projects portable: being able to charge your battery in the most convenient manner will let projects run no matter what power is available...

Pimoroni PIM745 - A 3-in-1 super sensor suite for environmental, light and movement sensing, with Qw/ST for easy, solderless connectivity. We heard you like sensors (we definitely like sensors!). So...

PIM722 -A minimal but powerful RP2350 breakout board modelled on a Pin Grid Array, with the maximum exposed pins crammed into the smallest possible space. PGA2350 is a compact RP2350...

The USB Switch/Multiplexer allows a USB device (or multiple devices if connected via a USB hub) to be switched between two hosts, or powered off. This newer 4-pin version adds a 3.3V output which can...

The 8086 USB-USB NULL Modem (UUNM) is a back-to-back USB to Serial converter using USB CDC Serial - meaning drivers are already built in to most modern operating systems (Linux/Windows 10/Mac OS...

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino-compatible. As well as detecting RGB colour and light level, it has added bells and whistles...

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the...