Coder Legion - Recent posts tagged float

How Do Smart Devices Perform Multiple Tasks?

Mon, 04 May 2026 10:58:23 +0000

Hello, I'm Ganesh. I'm building git-lrc, an AI code reviewer that runs on every commit. It is free, unlimited, and source-available on Github. Star Us to help devs discover the project. Do give it a try and share your feedback for improving the product.

Ever wonder how your Alexa, robot vacuum cleaner, and smartwatch seamlessly perform multiple tasks without getting stuck in the middle? How exactly are these devices programmed to handle it all?

You came to the right place to understand how it happens under the hood.

In this article, we will understand how these tasks are performed and how they work.

As all these devices use a microcontroller. I will be explaining using the simple microcontroller ESP8266.

How will the task be performed?

Every smart device consists of a microcontroller. These microcontrollers are programmed to perform specific tasks.

These tasks are performed using a single loop function.

void loop() {
 // Perform Task
}

This loop function will run continuously.

In this loop, we can do multiple things.

Let's take the example of a weather monitoring device.
These operations are done using a single loop function. As there is nothing else to do.

Start Device
Start Loop
Read sensor data
Display data / Store data
Repeat the process

void loop() {
 // Read data from sensor
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

 // Send data to cloud
  sendDataToCloud(temperature, humidity);
}

But this comes with a problem.

This loop will be running with a microsecond delay.
If we run this loop function, it will run continuously. Means there will be no delay between the operations.

How will a normal loop cause a problem?

Let's assume the above operation takes 1 ms (which is not true in real-world use, as it depends on which microcontroller you use).

The DHT11 sensor should have a 1-second delay between readings.

That means the above loop will run 1000 times in 1 second to just see if the sensor data has changed.

Can you see the problem?

1000 times operation means 1000 times power consumption.

1000 times the power consumption means the battery will drain fast, or the embedded system will heat up.

To avoid this, we can use a delay function.

void loop() {
 // Read data from sensor
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

 // Send data to cloud
  sendDataToCloud(temperature, humidity);

 // Wait for 1 second
  delay(1000);
}

By adding a delay, we are making sure that the loop function is not running continuously.

This is a good implementation if we have only one task to perform.

But if we want to do multiple operations to be performed in specific intervals.

Adding Other Operations in a loop

Like this, if we want to read the DHT11 sensor every 1 second and read the MQ2 sensor every 5 seconds. We can't use the delay function.

It will be like this.

void loop() {
 // Read data from sensor
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

 // Send data to cloud
  sendDataToCloud(temperature, humidity);
 // Read data from sensor
  float gas = analogRead(MQ2_PIN);

 // Send data to cloud
  sendDataToCloud(gas);

 // Wait for 5 seconds
  delay(5000);
}

This will cause a 5-second no-data reading from the DHT11 sensor.

Hence, there will be data loss for 5 seconds.

Here is where the task scheduler comes into the picture.

What is Task Scheduler?

A task scheduler is a lightweight system that allows a processor to juggle multiple activities seemingly at the same time, a concept known as multitasking.

A Task Scheduler solves this problem using a "to-do list" approach.

Instead of freezing, the program loops continuously at top speed.

Every time it loops, the scheduler checks the clock and looks at its list of tasks to see if any are due to run right now.

If a task's time is up, the scheduler runs it and then immediately goes back to checking the clock.

To understand the internal clock, imagine the microcontroller holding a stopwatch that starts counting milliseconds the moment it powers on.

In the Arduino framework, this stopwatch is read using a function called millis().

Instead of pausing the whole system to wait, the scheduler constantly checks this stopwatch against a simple formula for each task:

Current Time - Last Time Executed >= Interval

Here is a simple example of how the task scheduler works in ESP8266.

Ex:

unsigned long previousDHTTime = 0; // Remembers the last time DHT ran
unsigned long previousMQ2Time = 0; // Remembers the last time MQ2 ran

const long dhtInterval = 1000; // 1000 milliseconds = 1 second
const long mq2Interval = 5000; // 5000 milliseconds = 5 seconds

void setup() {
 // Initialization code goes here
}

void loop() {
 // 1. Read the internal stopwatch
  unsigned long currentMillis = millis(); 

 // 2. Check the DHT Task
  if (currentMillis - previousDHTTime >= dhtInterval) {
 previousDHTTime = currentMillis; // Reset this task's timer
    float temperature = dht.readTemperature();
    float humidity = dht.readHumidity();

 // Send data to cloud
    sendDataToCloud(temperature, humidity);

 }

 // 3. Check the MQ2 Task
  if (currentMillis - previousMQ2Time >= mq2Interval) {
 previousMQ2Time = currentMillis; // Reset this task's timer

    float gas = analogRead(MQ2_PIN);

 // Send data to cloud
    sendDataToCloud(gas);
 }
}

This way, we can perform multiple operations in specific intervals without blocking the loop function.

Core Logic of Task Scheduler

I want to perform two operations in ESP8266.

Blink the LED every 2.5 seconds 1 time.
Blink the LED every 5 seconds 2 times.

Let's see how to do this without using the built-in task scheduler.

Set up serial communication and the LED pin.
Start Loop.
Check if 2.5 seconds have passed since the last task activation.
If yes, perform the blink.
Check if 5 seconds have passed since the last task activation.
If yes, perform the blink

#include <Arduino.h>

unsigned long t25, t50;

/**
 * Performs a single blink on the built-in LED (Active Low).
 * @param message Debug message to output to Serial.
 */
void performBlink(const char *message) {
  Serial.println(message);
  digitalWrite(LED_BUILTIN, 0); // LED ON
  delay(80);
  digitalWrite(LED_BUILTIN, 1); // LED OFF
  delay(80);
}

void setup() {
  Serial.begin(115200);
  pinMode(LED_BUILTIN, OUTPUT);
  digitalWrite(LED_BUILTIN, 1); // Start with LED OFF
}

void loop() {
 // Task 1: Every 2.5s (triggers at 2.5s, 5.0s, 7.5s...)
  if (millis() - t25 >= 2500) {
 t25 = millis();
    performBlink("[2.5s] ");
 }

 // Task 2: Every 5.0s (triggers at 5.0s, 10.0s...)
 // At 5s, both tasks trigger, resulting in a double blink.
  if (millis() - t50 >= 5000) {
 t50 = millis();
    performBlink("[5.0s] ");
 }
}

Output:

[2.5s] 
[5.0s] 
[2.5s] 
[2.5s] 
[5.0s]

See, as we defined, to use a 2.5 sec interval for the first task and a 5 sec interval for the second task.

This also means the 2nd time, a 2.5 sec blink will happen after 5 sec from the 1st blink.

This will create a 2-second blink in 5 sec.

<h2

How to perform multiple operations in the ESP8266?

Fri, 10 Apr 2026 21:18:16 +0000

In this article, We will be exploring how to perform multiple operations in ESP8266.

As we are using ESP8266, we will be using Arduino framework.
Let see how operations are performed in ESP8266 or any other embedded system.

How Operations are performed in ESP8266?

Before going to understand how to perform multiple operations in ESP8266. Let's understand what is how regular programming works in embedded systems.

Any activity in embedded system is done using loop function.

void loop() {
  // Do something
}

This loop function will run continuously.

In this loop we can do multiple things.

For example we can read dht11 sensor data

void loop() {
  // Read data from sensor
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

  // Send data to cloud
  sendDataToCloud(temperature, humidity);
}

But this comes with a problem.

If we run this loop function, it will run continuously. Means there will be no delay between the operations.

How Normal Loop will cause problem?

Let's assume above operation takes 1 ms (which is not true in real world).
And DHT11 sensor should have 1 second delay between readings.

That means above loop will run 1000 times in 1 second to just see if the sensor data is changed.

Can you see the problem?

1000 times operation means 1000 times power consumption.

1000 times power consumption means battery will drain fast or embedded system will heat up.

To Avoid this we can use delay function.

void loop() {
  // Read data from sensor
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

  // Send data to cloud
  sendDataToCloud(temperature, humidity);

  // Wait for 1 second
  delay(1000);
}

By adding delay we are making sure that the loop function is not running continuously.

But this also has a problem.

If we add delay of 1 second, it means the loop function will run only once in 1 second.

So if we want to do multiple operations to be performed in specific intervals. It will be blocked.

Adding Other Operation in loop

Like this if we want to read dht11 sensor every 1 second and read mq2 sensor every 5 seconds. We can't use delay function.

It will be like this

void loop() {
  // Read data from sensor
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

  // Send data to cloud
  sendDataToCloud(temperature, humidity);
  // Read data from sensor
  float gas = analogRead(MQ2_PIN);

  // Send data to cloud
  sendDataToCloud(gas);

  // Wait for 5 seconds
  delay(5000);
}

This will cause 5 sec no data reading from dht11 sensor.

Here where task scheduler comes into picture.

What is Task Scheduler?

A task scheduler is a lightweight system that allows a processor to juggle multiple activities seemingly at the same time, a concept known as multitasking.

A Task Scheduler solves this problem using a "to-do list" approach.

Instead of freezing, the program loops continuously at top speed.

Every time it loops, the scheduler checks the clock and looks at its list of tasks to see if any are due to run right now.

If a task's time is up, the scheduler runs it, and then immediately goes back to checking the clock.

To understand the internal clock, imagine the microcontroller holding a stopwatch that starts counting milliseconds the moment it powers on.

In Arduino framework, this stopwatch is read using a function called millis().

Instead of pausing the whole system to wait, the scheduler constantly checks this stopwatch against a simple formula for each task:

Current Time - Last Time Executed >= Interval

Here is simple example of how task scheduler works in ESP8266.

Ex:

unsigned long previousDHTTime = 0;  // Remembers the last time DHT ran
unsigned long previousMQ2Time = 0;  // Remembers the last time MQ2 ran

const long dhtInterval = 1000;      // 1000 milliseconds = 1 second
const long mq2Interval = 5000;      // 5000 milliseconds = 5 seconds

void setup() {
  // Initialization code goes here
}

void loop() {
  // 1. Read the internal stopwatch
  unsigned long currentMillis = millis(); 

  // 2. Check the DHT Task ⏱️
  if (currentMillis - previousDHTTime >= dhtInterval) {
    previousDHTTime = currentMillis;  // Reset this task's timer
    float temperature = dht.readTemperature();
    float humidity = dht.readHumidity();

    // Send data to cloud
    sendDataToCloud(temperature, humidity);

  }

  // 3. Check the MQ2 Task ⏱️
  if (currentMillis - previousMQ2Time >= mq2Interval) {
    previousMQ2Time = currentMillis;  // Reset this task's timer

    float gas = analogRead(MQ2_PIN);

    // Send data to cloud
    sendDataToCloud(gas);
  }
}

This way we can perform multiple operations in specific intervals without blocking the loop function.

Conclusion

In this article we have seen how to perform multiple operations in specific intervals without blocking the loop function in ESP8266.

In next article we will use inbuilt task scheduler and itegrate with painlessmesh.

Any feedback or contributors are welcome! It’s online, source-available, and ready for anyone to use.
⭐ Star it on GitHub: https://github.com/HexmosTech/git-lrc