How to Remove Orphan Linux Boot Entries from Windows 11 UEFI

Tue, 14 Apr 2026 14:09:31 +0000

Level: Intermediate
Estimated Time: 15–20 minutes
Operating System: Windows 11 (UEFI systems)

Summary

After replacing a Linux installation (such as Pop!_OS, Ubuntu, or Arch Linux) with Windows 11, old boot entries may remain visible in UEFI firmware.

This happens because UEFI boot configuration is stored in:

EFI System Partition (ESP)
UEFI NVRAM boot entries

Both must be cleaned.

⚠️ Before you start: Backup your data. Modifying the EFI partition or NVRAM entries can make your system unbootable if done incorrectly.

Technical Background

EFI System Partition (ESP)

The EFI System Partition (ESP) is a FAT32-formatted partition that stores the bootloaders for all installed operating systems. On Windows systems, it typically ranges from 100–500 MB in size and is labeled as "System".

Typical structure:

EFI/
├── Microsoft/
├── Boot/
├── pop_os/
├── systemd/
├── ubuntu/
└── linux/

⚠️ Do NOT remove:

Microsoft/

Boot/

NVRAM Boot Entries

UEFI firmware stores boot entries in non-volatile memory.

Each entry contains:

GUID identifier
Description
Path to EFI loader
Device reference

Removing EFI files does not remove NVRAM entries.

Step 1 — Mount EFI Partition

Open Command Prompt as Administrator.

diskpart

list disk
select disk 0
list partition

⚠️ Replace 0 with your system disk number.

select partition 1
assign letter=Z
exit

⚠️ Replace 1 with the EFI partition (~100–500 MB, Type: System)

Step 2 — Remove Linux Bootloader Files

Z:
cd \EFI
dir

Remove Linux folders:

rmdir /s /q systemd
rmdir /s /q pop_os

Parameters:

/s → removes directories recursively
/q → quiet mode (no confirmation)

Permission Errors

takeown /f systemd /r /d y

Parameters:

/f → target folder
/r → recursive
/d y → auto confirm

On Portuguese Windows, use /d s instead of /d y.

icacls systemd /grant Administrators:F /t

rmdir /s /q systemd

Step 3 — Remove NVRAM Boot Entries

3.1 List firmware entries

bcdedit /enum firmware

Example output:

Firmware Application (101fffff)
-------------------------------
identifier              {29c75bf6-3303-11f1-b7f4-e7fe7d8485ec}
device                  partition=\Device\HarddiskVolume1
path                    \EFI\systemd\systemd-bootx64.efi
description             Pop!_OS

Firmware Application (101fffff)
-------------------------------
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager

3.2 Identify entries to remove

Remove entries that reference:

systemd
pop_os
ubuntu
linux

3.3 Delete orphan entry

bcdedit /delete {29c75bf6-3303-11f1-b7f4-e7fe7d8485ec} /f

Parameter:

/f → force deletion without confirmation

⚠️ NEVER delete:

{bootmgr}

{current}

Step 4 — Remove drive letter

diskpart
select disk 0
select partition 1
remove letter=Z
exit

Troubleshooting

Problem 1 — Access denied

takeown /f systemd /r /d y
icacls systemd /grant Administrators:F /t
rmdir /s /q systemd

Problem 2 — delete fails

Possible causes:

entry already removed
firmware protected entry
invalid reference

Solution:

reboot
remove EFI files first
run again

Problem 3 — entry still appears

Possible causes:

firmware cache
fallback recreated
BIOS bug

Solutions:

reboot twice
load BIOS defaults
update BIOS

Problem 4 — Windows does not boot

Method 1 — Startup Repair

Boot Windows installer USB
Repair your computer
Startup Repair

Method 2 — Recovery Command Prompt

bcdboot C:\Windows /s Z: /f UEFI

Commands Used

Command	Purpose	Documentation
diskpart	Disk and partition management	https://learn.microsoft.com/windows-server/administration/windows-commands/diskpart
bcdedit	Manage firmware boot entries	https://learn.microsoft.com/windows-hardware/drivers/devtest/bcdedit
takeown	Take ownership of files	https://learn.microsoft.com/windows-server/administration/windows-commands/takeown
icacls	Modify permissions	https://learn.microsoft.com/windows-server/administration/windows-commands/icacls
rmdir	Remove directories	https://learn.microsoft.com/windows-server/administration/windows-commands/rmdir
bcdboot	Rebuild Windows bootloader	https://learn.microsoft.com/windows-hardware/manufacture/desktop/bcdboot-command-line-options

Version Notes

Version	Date	Changes
1.0	April 2026	Initial procedure
1.1	April 2026	Added EFI explanation
1.2	April 2026	Added NVRAM cleanup
1.3	April 2026	Added troubleshooting
1.4	April 2026	Added command table
1.5	April 2026	Added recovery section
1.6	April 2026	Safety and locale improvements

✅ Quick Checklist (click to expand)

- [ ] Backup completed - [ ] Disk/Partition numbers verified - [ ] Microsoft/ and Boot/ preserved - [ ] {bootmgr} and {current} not deleted - [ ] Drive letter removed

Tested Environment

Windows 11 24H2
UEFI firmware
GPT disk
Pop!_OS systemd-boot

Disclaimer

Backup before modifying EFI partition.
Verify disk and partition numbers carefully.

Coder Legion - Recent posts tagged efi