File Transfer Protocol (FTP) in Application Layer

FTP or File Transfer Protocol is said to be one of the earliest and also the most common forms of transferring files on the internet. Located in the application layer of the OSI model, FTP is a basic system that helps in transferring files between a client and a server. It is what makes the FTP unique that the system provides a reliable and efficient means of transferring files from one system to another even if they have different file structures and operating systems. Contrary to other protocols such as http that cover hypertexts and web resources in general, ftp is dedicated to the management and the transfer of text, binary, or image files.

What is File Transfer Protocol?

FTP is a standard communication protocol. There are various other protocols like HTTP which are used to transfer files between computers, but they lack clarity and focus as compared to FTP. Moreover, the systems involved in connection are heterogeneous, i.e. they differ in operating systems, directories, structures, character sets, etc the FTP shields the user from these differences and transfers data efficiently and reliably. FTP can transfer ASCII, EBCDIC, or image files. The ASCII is the default file share format, in this, each character is encoded by NVT ASCII. In ASCII or EBCDIC the destination must be ready to accept files in this mode. The image file format is the default format for transforming binary files.

File Transfer Protocol

Types of FTP

There are different ways through which a server and a client do a file transfer using FTP. Some of them are mentioned below:

• Anonymous FTP: Anonymous FTP is enabled on some sites whose files are available for public access. A user can access these files without having any username or password. Instead, the username is set to anonymous, and the password is to the guest by default. Here, user access is very limited. For example, the user can be allowed to copy the files but not to navigate through directories.

• Password Protected FTP: This type of FTP is similar to the previous one, but the change in it is the use of username and password.

• FTP Secure (FTPS): It is also called as FTP Secure Sockets Layer (FTP SSL). It is a more secure version of FTP data transfer. Whenever FTP connection is established, Transport Layer Security (TLS) is enabled.

• FTP over Explicit SSL/TLS (FTPES): FTPES helps by upgrading FTP Connection from port 21 to an encrypted connection.

• Secure FTP (SFTP): SFTP is not a FTP Protocol, but it is a subset of Secure Shell Protocol, as it works on port 22.

What is FTP Useful For?

FTP is especially useful for:

• Transferring Large Files: FTP can transfer large files in one shot; thus applicable when hosting websites, backing up servers, or sharing files in large quantities.
• Remote File Management: Files on a remote server can be uploaded, downloaded, deleted, renamed, and copied according to the users’ choices.
• Automating File Transfers: FTP is a great protocol for the execution of file transfers on predefined scripts and employments.
• Accessing Public Files: Anonymous FTP means that everybody irrespective of the identity is allowed to download some files with no permissions needed.

How to Use FTP?

To use FTP, follow these steps:

• Connect to the FTP Server: One can connect to the server using the address, username and password through an FTP client or a command line interface. Anonymous Information may not need a username and password.
• Navigate Directories: Some commands include ls that is used to list directories and cd that is used to change directories.
• Transfer Files: File transfer may be done by using the commands such as get for downloading files, and put for uploading files.
• Manage Files: Make operations like deletion (Delete), renaming (Rename) as well as copying (Copy) of files.
• Close the Connection: Once file transfer has been accomplished, terminate the connection by giving the bye or quit command.

How Does FTP Work?

FTP is a client server protocol that has two communication channel, command channel for conversation control and data channel for file content.

Here are steps mentioned in which FTP works:

• A user has to log in to FTP Server first, there may be some servers where you can access to content without login, known as anonymous FTP.
• Client can start a conversation with server, upon requesting to download a file.
• The user can start different functions like upload, delete, rename, copy files, etc. on server.

FTP can work on different modes like Active and Passive modes. For more, you can refer to Difference between Active and Passive FTP.

Types of Connection in FTP

• Control Connection
• Data Connection

Control Connection

For sending control information like user identification, password, commands to change the remote directory, commands to retrieve and store files, etc., FTP makes use of a control connection. The control connection is initiated on port number 21. 

Data connection

For sending the actual file, FTP makes use of a data connection. A data connection is initiated on port number 20. 
FTP sends the control information out-of-band as it uses a separate control connection. Some protocols send their request and response header lines and the data in the same TCP connection. For this reason, they are said to send their control information in-band. HTTP and SMTP are such examples. 

FTP Session

When an FTP session is started between a client and a server, the client initiates a control TCP connection with the server side. The client sends control information over this. When the server receives this, it initiates a data connection to the client side. But the control connection remains active throughout the user session. As we know HTTP is stateless . But FTP needs to maintain a state about its user throughout the session. 

FTP Clients

FTP works on a client-server model. The FTP client is a program that runs on the user’s computer to enable the user to talk to and get files from remote computers. It is a set of commands that establishes the connection between two hosts, helps to transfer the files, and then closes the connection. 

Some of the commands are: 

get the filename(retrieve the file from the server)

get the filename(retrieve multiple files from the server )

ls(list files available in the current directory of the server)

There are also built-in FTP programs, which makes it easier to transfer files and it does not require remembering the commands.

FTP Data Types

The data type of a file, which determines how the file is represented overall, is the first piece of information that can be provided about it. The FTP standard specifies the following four categories of data:

• ASCII: Describes an ASCII text file in which each line is indicated by the previously mentioned type of end-of-line marker.
• EBCDIC: For files that use IBM’s EBCDIC character set, this type is conceptually identical to ASCII.
• Image: This is the “black box” mode I described earlier; the file has no formal internal structure and is transferred one byte at a time without any processing.
• Local: Files containing data in logical bytes with a bit count other than eight can be handled by this data type.

FTP Replies

Some of the FTP replies are:

• 200 – Command okay.
• 530 – Not logged in.
• 331 –  User name okay, need a password.
• 221 – Service closing control connection.
• 551 – Requested action aborted: page type unknown.
• 502 – Command not implemented.
• 503 – Bad sequence of commands.
• 504 – Command not implemented for that parameter. 

Characteristics of FTP 

• FTP uses TCP as a transport layer protocol.
• It is good for simple file transfers, such as during boot time.
• Errors in the transmission (lost packets, checksum errors) must be handled by the TFTP server.
• It uses only one connection through well-known port 69.
• TFTP uses a simple lock-step protocol (each data packet needs to be acknowledged). Thus the throughput is limited.

FTP’s Security Issues

• Information could not go across a secure tunnel since FTP was not intended to do so. Thus, encryption is not present. A hacker would not need to struggle with encryption to access or alter data that is usable if they could intercept an FTP transaction.
• Even with FTP cloud storage, data can still be intercepted and misused if the service provider’s system is attacked.
• As a result, data sent via FTP is a target for spoofing, sniffing, brute force, and other types of attacks that move somewhat slowly. A hacker might examine an FTP transmission and try to take advantage of any flaws by simply port scanning.
• The fact that FTP uses clear-text passwords—passwords that haven’t been encrypted—is one of its main security flaws. Put differently, “Jerry1992” appears exactly like “Jerry1992.” The real password is hidden via an algorithm in more secure protocols. As a result, “Jerry1992” might appear as “dj18387saksng8937d9d8d7s6a8d89.” Passwords like this are not secured by FTP, which makes them more easily cracked by malicious actors.

What is an FTP Port?

FTP operates using two ports:

• Port 21: As mentioned earlier this is where the commands are issued.
• Port 20: This is the special port required for data connection where the real transfer of file is made.

How to Change FTP Port Numbers

To change the default FTP port numbers, follow these steps:

• Access Server Configuration: Connect the control panel of your FTP server well as the FTP server configuration file used.
• Modify the Port Number: Find out the possible port settings from the configuration file. Alter the control port, default port is 21 and that of the data is 20.
• Restart the FTP Service: Finally once you have saved your changes you need to stop and restart the FTP service so that the new port settings can be implemented.
• Update Client Settings: Make certain that all the FTP clients that connect with the server are notified of the new port numbers.

Advantages of FTP

• File sharing also comes in the category of advantages of FTP in this between two machines files can be shared on the network.
• Speed is one of the main benefits of FTP.
• Since we don’t have to finish every operation to obtain the entire file, it is more efficient.
• Using the username and password, we must log in to the FTP server. As a result, FTP might be considered more secure.
• We can move the files back and forth via FTP. Let’s say you are the firm manager and you provide information to every employee, and they all reply on the same server.

Disadvantages of FTP

• File size limit is the drawback of FTP only 2 GB size files can be transferred.
• More then one receivers are not supported by FTP.
• FTP does not encrypt the data this is one of the biggest drawbacks of FTP.
• FTP is unsecured we use login IDs and passwords making it secure but they can be attacked by hackers.

Difference Between FTP and SFTP

FTP Security Challenges

FTP was not designed with security in mind, leading to several vulnerabilities:

• Lack of Encryption: This is because data such as usernames and passwords are transmitted without encryption and hence easily vulnerable to different attacks.
• Vulnerabilities to Attacks: FTP transmissions are vulnerable to attacks such as spoofing, sniffing, brute force, and the likes are slow attacks. They suggested that the data can be intercepted and changed easily by hackers.
• Clear-Text Passwords: Unfortunately, FTP client authentication employs non encrypted passwords, which makes them vulnerable to hacking.

Conclusion

FTP is still a powerful and effective method for transferring files between systems and still prevails in cases of transferring large files, and in the course of automated systems. Nevertheless, it does not come with security enhancements making it fairly inadequate for sensitive information exchange. In the case of transfers, safer modes like SFTP or FTPS should be encouraged since they make transfers secure. Hence, despite these drawbacks, FTP remains useful to this day since it is simple and stabilized.

Frequently Asked Questions on File Transfer Protocol – FAQs

Differentiate between FTP and SFTP?

FTP is a insecure method and transfers the data in plain text whereas SFTP is a secure method that transfers the data in encrypted text.

What is passive FTP Connection?

In passive FTP, the client initiates both the control and data connections to the server.

What is the default port for FTP?

The default port for FTP is 21. Default port is used for the control connection when the data transfer is occuring on other ports.

Name the two modes of FTP data transfer?

• Active Mode
• Passive Mode

What is the difference between FTP and SFTP?

The conventional file transmission protocol is called FTP. It’s a simple method of sharing files via the Internet. An additional degree of security is added to file transfers with SFTP, or Secure File Transfer Protocol, an alternative to FTP.

GeeksforGeeks

Improve