🏆 ยอดนิยม: web//https://www.geeksforgeeks.org/socket programming cc

What is socket programming?
Socket programming is a way of connecting two nodes on a network to communicate with each other. One socket(node) listens on a particular port at an IP, while other socket reaches out to the other to form a connection. Server forms the listener socket while client reaches out to the server.

State diagram for server and client model

Stages for server

Socket creation:
```
int sockfd = socket(domain, type, protocol)
```
sockfd: socket descriptor, an integer (like a file-handle)
domain: integer, communication domain e.g., AF_INET (IPv4 protocol) , AF_INET6 (IPv6 protocol)
type: communication type
SOCK_STREAM: TCP(reliable, connection oriented)
SOCK_DGRAM: UDP(unreliable, connectionless)
protocol: Protocol value for Internet Protocol(IP), which is 0. This is the same number which appears on protocol field in the IP header of a packet.(man protocols for more details)
Setsockopt:
```
int setsockopt(int sockfd, int level, int optname,  
                   const void *optval, socklen_t optlen);
```
This helps in manipulating options for the socket referred by the file descriptor sockfd. This is completely optional, but it helps in reuse of address and port. Prevents error such as: “address already in use”.
Bind:
```
int bind(int sockfd, const struct sockaddr *addr, 
                          socklen_t addrlen);
```
After creation of the socket, bind function binds the socket to the address and port number specified in addr(custom data structure). In the example code, we bind the server to the localhost, hence we use INADDR_ANY to specify the IP address.
Listen:
```
int listen(int sockfd, int backlog);
```
It puts the server socket in a passive mode, where it waits for the client to approach the server to make a connection. The backlog, defines the maximum length to which the queue of pending connections for sockfd may grow. If a connection request arrives when the queue is full, the client may receive an error with an indication of ECONNREFUSED.
Accept:
```
int new_socket= accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen);
```
It extracts the first connection request on the queue of pending connections for the listening socket, sockfd, creates a new connected socket, and returns a new file descriptor referring to that socket. At this point, connection is established between client and server, and they are ready to transfer data.

Stages for Client

Socket connection: Exactly same as that of server’s socket creation
Connect:
```
int connect(int sockfd, const struct sockaddr *addr,  
                             socklen_t addrlen);
```
The connect() system call connects the socket referred to by the file descriptor sockfd to the address specified by addr. Server’s address and port is specified in addr.

Implementation
Here we are exchanging one hello message between server and client to demonstrate the client/server model.

server.c

// Server side C/C++ program to demonstrate Socket programming 
#include <unistd.h> 
#include <stdio.h> 
#include <sys/socket.h> 
#include <stdlib.h> 
#include <netinet/in.h> 
#include <string.h> 
#define PORT 8080 
int main(int argc, char const *argv[]) 
{ 
    int server_fd, new_socket, valread; 
    struct sockaddr_in address; 
    int opt = 1; 
    int addrlen = sizeof(address); 
    char buffer[1024] = {0}; 
    char *hello = "Hello from server"; 
       
    // Creating socket file descriptor 
    if ((server_fd = socket(AF_INET, SOCK_STREAM, 0)) == 0) 
    { 
        perror("socket failed"); 
        exit(EXIT_FAILURE); 
    } 
       
    // Forcefully attaching socket to the port 8080 
    if (setsockopt(server_fd, SOL_SOCKET, SO_REUSEADDR | SO_REUSEPORT, 
                                                  &opt;, sizeof(opt))) 
    { 
        perror("setsockopt"); 
        exit(EXIT_FAILURE); 
    } 
    address.sin_family = AF_INET; 
    address.sin_addr.s_addr = INADDR_ANY; 
    address.sin_port = htons( PORT ); 
       
    // Forcefully attaching socket to the port 8080 
    if (bind(server_fd, (struct sockaddr *)&address;,  
                                 sizeof(address))<0) 
    { 
        perror("bind failed"); 
        exit(EXIT_FAILURE); 
    } 
    if (listen(server_fd, 3) < 0) 
    { 
        perror("listen"); 
        exit(EXIT_FAILURE); 
    } 
    if ((new_socket = accept(server_fd, (struct sockaddr *)&address;,  
                       (socklen_t*)&addrlen;))<0) 
    { 
        perror("accept"); 
        exit(EXIT_FAILURE); 
    } 
    valread = read( new_socket , buffer, 1024); 
    printf("%s\n",buffer ); 
    send(new_socket , hello , strlen(hello) , 0 ); 
    printf("Hello message sent\n"); 
    return 0; 
} 

client.c

// Client side C/C++ program to demonstrate Socket programming 
#include <stdio.h> 
#include <sys/socket.h> 
#include <arpa/inet.h> 
#include <unistd.h> 
#include <string.h> 
#define PORT 8080 
   
int main(int argc, char const *argv[]) 
{ 
    int sock = 0, valread; 
    struct sockaddr_in serv_addr; 
    char *hello = "Hello from client"; 
    char buffer[1024] = {0}; 
    if ((sock = socket(AF_INET, SOCK_STREAM, 0)) < 0) 
    { 
        printf("\n Socket creation error \n"); 
        return -1; 
    } 
   
    serv_addr.sin_family = AF_INET; 
    serv_addr.sin_port = htons(PORT); 
       
    // Convert IPv4 and IPv6 addresses from text to binary form 
    if(inet_pton(AF_INET, "127.0.0.1", &serv;_addr.sin_addr)<=0)  
    { 
        printf("\nInvalid address/ Address not supported \n"); 
        return -1; 
    } 
   
    if (connect(sock, (struct sockaddr *)&serv;_addr, sizeof(serv_addr)) < 0) 
    { 
        printf("\nConnection Failed \n"); 
        return -1; 
    } 
    send(sock , hello , strlen(hello) , 0 ); 
    printf("Hello message sent\n"); 
    valread = read( sock , buffer, 1024); 
    printf("%s\n",buffer ); 
    return 0; 
} 

Compiling:
gcc client.c -o client
gcc server.c -o server

Output:

Client:Hello message sent
Hello from server
Server:Hello from client
Hello message sent

Next: Socket Programming in C/C++: Handling multiple clients on server without multi threading
This article is contributed by Akshat Sinha. If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to contribute@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

Please write comments if you find anything incorrect, or you want to share more information about the topic discussed above.

Rated as one of the most sought after skills in the industry, own the basics of coding with our C++ STL Course and master the very concepts by intense problem-solving.

My Personal Notes

Oct	NOV	Dec
	11
2019	2020	2021

server.c

client.c

Recommended Posts: