ERYING, a Chinese motherboard maker known for stuffing laptop-grade processors onto desktop boards, has done it again. ERYING’s reported official announcement date was September 23, 2026, and on September 26, 2026, TweakTown and VideoCardz both reported that the company launched two new “MoDT” (Mobile-on-Desktop) motherboards built around soldered Intel Raptor Lake embedded CPUs, the Core i7-13798HRE-D4 and Core i5-13598HRE-D4, with the cheaper board starting at roughly $180. It is a small story on paper, but it lands at an unusually loaded moment for the PC hardware market: DRAM and NAND prices are climbing, wafer costs are projected to jump as much as 40% by 2027 according to UBS, and PC makers like Acer are already warning customers to expect 20% higher prices. Against that backdrop, a sub-$200 motherboard with a CPU already attached looks less like a curiosity and more like a signal.
This article breaks down what ERYING actually announced, why soldering an embedded mobile chip to a desktop board is such an unusual move, how it fits into the wider MoDT niche the company has built over the past three years, and what it says about the pressure the entire desktop PC market is under right now.
Don't miss new tech stories on Google
Add Tech Insider once in the Google app and our stories appear in your news suggestions.
What ERYING Announced on September 26, 2026
According to TweakTown’s report, titled “ERYING puts Intel’s unusual Raptor Lake embedded CPUs on desktop motherboards, starting at $180,” the company is now selling two compact MoDT boards that pair soldered Intel processors with DDR4 memory and PCIe 5.0 connectivity. VideoCardz’s parallel report, “Intel Core i7-13798HRE and i5-13598HRE ‘Raptor Lake Embedded’ CPUs launch on desktop motherboards from ERYING,” confirms the same two SKUs and lists Chinese pricing directly from ERYING’s storefronts.
The two boards are priced in yuan first, with the dollar conversion varying slightly by outlet because of exchange-rate rounding:
The Core i5-13598HRE-D4 board sells for 1,199 yuan, which VideoCardz converts to about $169 and TweakTown rounds to roughly $180. The Core i7-13798HRE-D4 board sells for 1,399 yuan, converting to about $197 by VideoCardz’s math and around $210 in TweakTown’s coverage. Both outlets note the underlying yuan pricing is identical; the dollar figures diverge only because of which exchange rate each site applied at the time of writing. The roughly $180 figure is the approximate converted price of the i5-13598HRE-D4 board, not a universally confirmed worldwide MSRP, and listings reportedly still showed 1,199 yuan and 1,399 yuan on October 22, 2026.
Both boards use the compact MoDT desktop form factor ERYING has favored since 2023, support PCIe 5.0 for the graphics card slot, and rely on DDR4 rather than the newer DDR5 standard, a choice that keeps the bill of materials cheap at a moment when DDR5 pricing has been volatile. Neither report from TweakTown or VideoCardz provides a full port-by-port I/O breakdown or confirms the exact chipset used, so those specifics should be treated as unconfirmed until ERYING or a hands-on reviewer publishes them.
Meet the Chips: Core i7-13798HRE and Core i5-13598HRE
The “HRE” suffix is the detail that makes this story stand out to anyone who follows Intel’s product naming. Standard Raptor Lake mobile chips carry an “H” suffix (like the Core i9-13900H), while Intel’s embedded line typically uses different naming conventions reserved for industrial, kiosk, and edge-computing hardware, not retail desktop boards. VideoCardz’s report is explicit that the i7-13798HRE and i5-13598HRE are classified as “Raptor Lake Embedded” parts, meaning Intel built them for embedded system integrators, not for a company selling loose motherboards to PC enthusiasts and builders on the open market.
Both new chips are BGA-soldered, meaning there is no socket and no way to swap the processor later. That is consistent with ERYING’s earlier SKYLINE-series MoDT boards, which TweakTown covered as far back as November 2023 in a report titled “This new Mini-ITX desktop mobo features pre-installed Core i9 CPU, up to 96GB of RAM.” That earlier generation offered seven pre-installed processor options ranging from the Core i5-13420H up to the flagship Core i9-13900H, a 14-core, 20-thread mobile chip that also showed up soldered onto ERYING’s Mini-ITX B760i overclocking board with a stated 45W TDP, according to ERYING’s own product announcement.
One detail both TweakTown and VideoCardz flag as a real limitation for buyers: the i7-13798HRE and i5-13598HRE boards do not expose usable integrated graphics output. Anyone buying one of these boards needs a discrete graphics card just to get a picture on screen, which changes the total cost of the build meaningfully compared to the advertised $180 starting price.
Why Soldering a Laptop CPU to a Desktop Board Is Unusual
Desktop PC culture has been built around modularity for four decades. You buy a socket, you buy a CPU, and years later you can drop in a new CPU without replacing the board. ERYING’s MoDT lineup throws that assumption out. The processor is permanently attached, so the appeal has to come from somewhere else entirely: price, form factor, and access to processors that would otherwise be locked inside a laptop chassis.
That trade-off has existed in the enthusiast market for years in a different form, mostly through eBay listings of pulled laptop motherboards or specialty importers selling “LGA1700 adapter” boards that let a mobile die run in a desktop-style shell. ERYING’s approach is more polished: it sells a finished, ready-to-use motherboard with the CPU already soldered and validated at the factory, rather than a salvaged part. That is a meaningfully different product category, closer to a mini PC motherboard than a DIY hack.
The unusual part, as TweakTown’s headline puts it directly, is that Intel’s embedded-tier silicon, normally destined for point-of-sale terminals, digital signage, and industrial controllers, is turning up in a product marketed to PC hobbyists building small-form-factor desktops. It blurs a line Intel has kept fairly firm: embedded parts get long-term supply guarantees and different validation profiles than consumer parts, and they are not typically sold through retail motherboard channels at all.
ERYING’s MoDT Track Record: From SKYLINE to HRE
This is not a one-off stunt. ERYING has been building out this niche steadily since late 2023. VideoCardz’s original coverage, “ERYING launches desktop Mini-ITX motherboards with 14-core i9-13900H CPU and DDR5-5600 memory support,” documented the first SKYLINE MoDT boards, which offered seven different pre-installed mobile CPUs and, notably, supported DDR5-5600 memory rather than the DDR4 used in the newest HRE boards.
ERYING’s own product catalog, reviewed as part of this reporting, lists a broader family that includes ITX boards built around the i7-13700H, i7-13620H, i9-13900H, and i5-13500H with DDR5 support, plus MATX-format boards including an i9-13900H DDR4 variant and a 14th-generation HX DDR5 variant. The i9-13900HK overclocking board, sold on a B760i-style Mini-ITX layout, listed at 2,889 yuan before a coupon dropped it to 2,600 yuan, according to ERYING’s own announcement on its site.
The pattern across three years is consistent: take a mobile or embedded Raptor Lake die, solder it to a small board, and sell the combination for less than the cost of buying a comparable desktop CPU and motherboard separately. The new HRE boards are the cheapest entry point in that lineup so far.
ERYING MoDT Motherboard Lineup at a Glance
| Product | CPU | Memory | Reported Price | Source |
|---|---|---|---|---|
| New MoDT board (2026) | Core i5-13598HRE-D4 | DDR4 | 1,199 yuan (~$169–$180) | VideoCardz / TweakTown |
| New MoDT board (2026) | Core i7-13798HRE-D4 | DDR4 | 1,399 yuan (~$197–$210) | VideoCardz / TweakTown |
| SKYLINE Mini-ITX (2023) | Core i9-13900H (up to) | DDR5-5600 | Not specified in reports | VideoCardz / TweakTown |
| B760i overclocking Mini-ITX | Core i9-13900HK | Not specified | 2,889 yuan list, 2,600 yuan with coupon | ERYING official announcement |
| MATX board | i9-13900H | DDR4 | Not specified in reports | ERYING product catalog |
How This Compares to Buying a Standard Desktop Raptor Lake Build
Neither TweakTown nor VideoCardz published a head-to-head benchmark between the new HRE boards and a socketed desktop Raptor Lake build, so any performance claim beyond what the outlets confirmed would be speculation. What is confirmed is the platform-level trade-off, and it is a real one for anyone deciding between the two approaches.
| Factor | ERYING MoDT (soldered embedded CPU) | Standard socketed desktop Raptor Lake |
|---|---|---|
| CPU upgrade path | None; CPU is fixed for the board’s lifetime | Swappable within the same socket generation |
| CPU class | Mobile/embedded die (H, HK, HRE suffixes) | Desktop-specific die, higher power envelope |
| Graphics output | None on the reported HRE boards; discrete GPU mandatory | Varies by SKU; many desktop chips include usable iGPU |
| Memory | DDR4 on the newest boards | DDR4 or DDR5 depending on chipset generation |
| Entry price | Reported starting around $169–$180 | Varies widely; comparable desktop CPU+board combos often cost more |
| Expansion slots | PCIe 5.0 confirmed on new boards; full I/O not detailed in reports | Full range of I/O typically available depending on chipset tier |
The core appeal, based on what the reports confirm, is cost and form factor rather than raw performance. A buyer gets a working CPU and board combination without separately shopping for a compatible socket, cooler mounting standard, and chipset, at the cost of never being able to upgrade the processor and needing a graphics card that a standard build might not require.
The Bigger Picture: A Memory and Wafer Cost Crunch
ERYING’s timing matters. The launch lands in the middle of a period where Acer has already warned that PC prices could climb 20% because of the ongoing memory shortage, and UBS has projected that silicon wafer prices could jump as much as 40% by 2027. Handheld and console makers are not immune either: Steam Deck pricing has climbed as the DRAM crisis deepens, and DDR5 modules in particular have seen sharp swings in cost over the past year.
Against that backdrop, a motherboard-and-CPU combo built around cheaper DDR4 memory and a repurposed mobile die starts to look like a rational response to component costs rather than just a curiosity for hobbyists. Building a small-form-factor desktop from scratch right now means facing DDR5 prices, GPU prices, and CPU prices that have all moved upward this year. A pre-integrated board that sidesteps the DDR5 premium by using DDR4, while still offering a modern PCIe 5.0 slot for a graphics card, is a narrower but real value proposition for budget builders, NAS enthusiasts, and hobbyists assembling home server or media-PC rigs.
It also lines up with a broader trend of PC component makers stretching mobile-first silicon into more form factors to manage supply and cost pressure, a dynamic also visible in how Intel’s own Nova Lake-S desktop lineup has been adjusted amid competitive pressure from AMD’s Zen 6 roadmap.
What Buyers Actually Get for $180
Framing this as simply “a $180 CPU and motherboard” undersells the real cost of a usable system. Because the i5-13598HRE-D4 and i7-13798HRE-D4 have no functional integrated graphics output according to the reports, buyers need to budget for a discrete GPU on top of the board price. Even an entry-level graphics card adds a meaningful chunk to the total, and anyone hoping to pair this with a high-end card for a small gaming rig should also factor in the physical and power-delivery considerations covered in general GPU upgrade guidance, since compact MoDT boards were not originally designed with large, power-hungry graphics cards in mind.
Cooling is another open question the reports do not fully resolve. Embedded and mobile dies are typically designed around laptop-style thermal solutions rather than desktop tower coolers, and buyers considering aftermarket cooling upgrades on Raptor Lake-based boards should look at how existing enthusiast cooling hardware, such as Thermal Grizzly’s Raptor Lake-era water blocks, is priced and scoped, since a soldered mobile die will have different thermal density characteristics than a full desktop chip.
None of this is disqualifying. It simply means the advertised entry price is a starting point rather than a complete build cost, the same caveat that applies to almost any bare motherboard purchase.
Who Is This Actually For?
Based on what TweakTown and VideoCardz report, and consistent with ERYING’s three-year history in this niche, the realistic buyer for these boards is not a mainstream desktop gamer. It is closer to three overlapping groups: budget home-server and NAS builders who want a compact board with modern PCIe 5.0 connectivity without paying full desktop-CPU prices, hobbyists building compact media PCs or firewall/router appliances who do not need a graphics-heavy build, and import/reseller channels that have historically picked up ERYING’s MoDT boards for regional markets outside China.
It is worth noting that mainstream Western retail availability for ERYING boards has historically run through resellers and import listings rather than major retailers like Newegg or Micro Center, and neither TweakTown nor VideoCardz confirmed a direct US retail channel for the new HRE boards at the time of their reports.
Historical Context: The MoDT Niche Isn’t New
Mobile-on-desktop motherboards are not an ERYING invention, but the company has become one of the more visible names in the space since 2023. The broader impulse behind MoDT products goes back further, to a persistent pattern in the PC industry where manufacturers with excess mobile CPU inventory, or access to embedded-tier silicon with long production runs, look for a second market beyond laptops and point-of-sale terminals.
What has changed since 2023 is the sophistication of the offering. ERYING’s early SKYLINE boards were positioned as a novelty for people who wanted a 14-core mobile chip in a small-form-factor desktop. The newer HRE boards, using genuinely embedded-tier Intel silicon rather than standard mobile “H” parts, suggest the company is now sourcing further down Intel’s product stack, likely chasing lower unit costs as it works through what mobile Raptor Lake components remain available before Intel’s newer generations fully displace the platform in the broader supply chain.
Risks and Open Questions
Several important details remain unconfirmed based on the current reporting. The exact chipset used on the two new boards has not been published by either outlet. The full I/O layout, including USB port count, networking hardware, and storage connectors, was not detailed in the TweakTown or VideoCardz coverage. Long-term software and BIOS support for embedded-tier CPUs sold through consumer channels is also an open question, since Intel’s embedded parts are typically supported through different channels than retail CPUs.
There is also a warranty and support consideration that is common to gray-market and import-adjacent hardware generally: buyers outside China should expect that returns, RMAs, and driver support will run through ERYING directly or through a reseller, not through Intel or a regional retail chain.
Predictions: Where This Trend Goes Next
A few things look likely to follow from this launch, based on ERYING’s pattern of releases and the current state of the PC component market.
First, expect more embedded-tier Raptor Lake SKUs to show up on ERYING boards over the next several months, following the same naming pattern as the i7-13798HRE and i5-13598HRE, as the company continues working through available embedded inventory. Second, as DDR5 pricing pressure continues into 2027, more budget-motherboard makers are likely to lean on DDR4-based designs paired with older or embedded silicon rather than chasing DDR5 compatibility at a higher bill-of-materials cost. Third, given that ERYING has already moved from mobile “H” chips to true “embedded” HRE parts, a similar embedded-tier approach applied to Intel’s newer Arrow Lake or Panther Lake mobile silicon is a plausible next step once that inventory becomes available at scale. Fourth, US and European availability will likely remain limited to import and reseller channels rather than major retail chains, continuing the pattern seen with ERYING’s earlier SKYLINE boards. Fifth, expect continued scrutiny from PC hardware outlets over the graphics-output limitation on these embedded chips, since it is the single biggest practical catch for prospective buyers evaluating the advertised price.
Market Impact: A Niche Product With Wider Implications
ERYING is a small player compared to Intel’s major motherboard partners, and this launch will not move Intel’s mobile or embedded silicon revenue in any measurable way. But the story is a useful data point in a larger conversation about how component makers are adapting to elevated memory and wafer costs. When a company builds an entire product line around finding cheaper paths to a working CPU-and-board combination, using embedded-tier silicon and last-generation memory standards, it is responding directly to the cost pressures also visible in reports about rising PC prices at Acer and rising component costs more broadly across the industry.
For the broader small-form-factor and home-lab community, it also expands the menu of low-cost compute options at a moment when even entry-level desktop CPU-and-motherboard combos are getting more expensive. Whether or not embedded-CPU boards go mainstream, they represent a growing corner of the market that mainstream coverage has mostly overlooked until stories like this one.
Frequently Asked Questions
What CPUs does ERYING’s new motherboard lineup use?
The two new boards use the Intel Core i7-13798HRE-D4 and Core i5-13598HRE-D4, both classified as “Raptor Lake Embedded” processors and soldered directly to the board, according to reports from TweakTown and VideoCardz published on September 26, 2026.
How much do the new ERYING boards cost?
The Core i5-13598HRE-D4 board is priced at 1,199 yuan, converting to roughly $169–$180 depending on the outlet’s exchange rate. The Core i7-13798HRE-D4 board is priced at 1,399 yuan, converting to roughly $197–$210.
Do these boards support integrated graphics?
No. Both TweakTown and VideoCardz report that the CPUs on the new boards lack usable integrated graphics output, meaning a discrete graphics card is required to get a video signal.
What memory type do the new boards support?
The new i7-13798HRE and i5-13598HRE boards use DDR4 memory. This differs from ERYING’s earlier SKYLINE Mini-ITX boards, some of which supported DDR5-5600.
Can the CPU be replaced or upgraded later?
No. The processors on ERYING’s MoDT boards are BGA-soldered directly to the motherboard, so there is no socket and no way to swap in a different CPU after purchase.
What is the difference between “H” and “HRE” Intel processor naming?
Intel’s standard mobile Raptor Lake chips use an “H” suffix (such as the Core i9-13900H), typically sold for laptops. The “HRE” suffix identifies embedded-tier parts that Intel designs for industrial and embedded system integrators, which is notable because ERYING is selling them through a retail-style desktop motherboard rather than an embedded system.
Has ERYING released similar products before?
Yes. ERYING has sold MoDT (Mobile-on-Desktop) motherboards since at least November 2023, when it launched SKYLINE Mini-ITX boards with pre-installed mobile CPUs ranging from the Core i5-13420H to the Core i9-13900H, along with a separate i9-13900HK overclocking board.
Where can these motherboards be purchased?
The reports from TweakTown and VideoCardz cite Chinese pricing and ERYING’s own storefronts. Neither report confirms a dedicated US or European retail channel, so availability outside China is likely to run through import or reseller listings, consistent with ERYING’s past products.
