Repository navigation

Release list

2.14.2 Latest

Latest

Koenkk released this 01 Oct 20:16

2.14.2

5c0c1c6

Improvements

#13337 Aqara UT-A01E: support custom NTC floor sensors (@w1r0x)
#13315 NodOn SIN-4-1-20, SIN-4-1-21 and SIN-4-2-20: make wired input self-bind configurable (@nthiers)
#13345 Tuya TS0601_cover_1: expose slat tilt on DP21 (@isaackennylee)
#13341 Yale LIA: expose lock action, source and user from operation events (@leonardodelfino)
#13310 Futurehome Charge: add plug lock state (@svhelge)
#13322 LEDVANCE 4058075729025: expose power_on_behavior (@andrei-lazarov)
#13323 LEDVANCE 4058075823976: expose brightness control (@andrei-lazarov)
#13279 Namron 4566700: expose additional configuration settings (@xses79)
#13271 Namron 540139X: expose temperature_display_mode (@torem)
#13288 OWON PC321: expose metering report schedule (@Diaoul)
#13268 SONOFF TRV-ZBT, TP-WGZBA: improve controls (@CubeZ2mDeveloper)
#13247 Purmo/Radson Yali Parada Plus: add keypad lockout (@vkardell)
#13256 SONOFF BASIC-ZB1GSP: read consumption and export energy attributes support (@CubeZ2mDeveloper)
#13231 Tuya TO-Q-SYS-JZT: support more features (@k7s5a2)
#13257 Tuya TS0001: expose power-on behavior, switch type, backlight, indicator and inching for _TZ3000_p26flek3 (@krobipd)
#13215 Namron 4512758: set duty cycle and cycle length in percent mode, fix backlight settings (@DurinMusicspear)
#13218 SONOFF SNZB-09P: add alarmStatus reporting and chime presets, gated to firmware >= 1.1.9 (@CubeZ2mDeveloper)
#13223 SONOFF SWV: expose manual irrigation settings as scalar controls (@CubeZ2mDeveloper)
#13204 SONOFF ZBMINIR2: expose more features (@CubeZ2mDeveloper)
#13188 LinknLink eMotion Air: support more features (@StarStarDust)
#13145 Namron Edge Thermostat (4566702/4566703/4512783/4512784): rework integration (@xses79)
#13162 Schneider CCTFR6000 UFH: expose demand percentage and cycle time per channel (@lxhunter)
#13146 Aqara QBKG11LM: add power_outage_memory support (@mcapmari)
#13148 Namron Edge Thermostat: allow regulator_cycle 0 and thermostat_mode_extra manual (@papatistos)
#13136 Profalux MOT-C1ZxxC/F: expose internal temperature (@fabienduval)
#13140 Third Reality: add meteringOnlyMode attribute and command lookups (@3reality-support)
#13150 Tuya TS0601_rcbo: add over voltage/current/temperature/leakage threshold controls (@mcapmari)
#13112 Allow Tuya queryOnDeviceAnnounce to be a per-device function (@sekot)
#13116 Aqara ZNMHLDJ01LM: support more features (@airlychee)
#12955 Bosch BSD-2: Add HA siren discovery (@burmistrzak)
#13114 Decode Tuya firmware IDs (@andrei-lazarov)
#13118 Tuya TS0726 1 and 3 gang scene switches: expose switch_inching on (@isaackennylee)
#1893 Ember: support manufacturer code stack config (@Nerivec)

Fixes

#33236 Home Assistant: fix humidity incorrect for multi-endpoint climate devices (@Koenkk)
#33037 Home Assistant: fix cover state reporting when moving from fully opened/closed state (@feixm1)
#33048 Home Assistant: support more action events (@mistic100)
#32654 Preserve HA name if set in withHomeassistant and remove analog prefix (@luar123)
#33102 Prevent unhandled error within winston transports (@Nerivec)
#33206 Republish retained messages on MQTT reconnect (@victor-fedorov-wb)
#13327 Aqara WSDCGQ12LM: use hPa for pressure (@svhelge)
#13309 Develco SMSZB-120: fix temperature (@svhelge)
#13285 FrankEver FK_V02 and FK-BV05: various improvements (@novittukyll)
#13318 Namron 4512783/4512784/4566702/4566703: set the clock as Unix local time (@pjsamuel3)
#13321 Namron Edge Thermostat: allow regulator_cycle = 0 (@xses79)
#13329 Tervix _TZE284_6kijc7nd: fix system_mode (@andrei-lazarov)
#13328 Tuya TS011F: Fix conditional switch_type_button expose (@andrei-lazarov)
#13265 Aqara ZNXNKG02LM: Fix settings not working (@andrei-lazarov)
#13276 DIYRuZ FreePad: prevent spurious "many_undefined" action from messages without presentValue (@Mike-Raziel)
#13299 Fix iasWarning toZigbee converter (@zador-blood-stained)
#13307 Legrand: fix configure failing for various devices (@svhelge)
#13262 Manhot: fix endpoints on multiple devices (@andrei-lazarov)
#13306 Moes ZG-101ZD / ZG-101ZL: ignore UNSUPPORTED_ATTRIBUTE in configure (@Michal-Za)
#13302 RINNconnect WSER40: fix not controllable (@onewaylifestreet)
#13270 SONOFF: SNZB-02M: fix pressure reading and reporting (@CubeZ2mDeveloper)
#13274 Third Reality 3RSB22BZ: prevent spurious "many" action from messages without presentValue (@Mike-Raziel)
#13277 Tuya TS0001: drop inching for _TZ3000_p26flek3 (@krobipd)
#13293 Zemismart ZM25RX-08/30: detect "stopped" motor_state (@andrei-lazarov)
#13282 Zemismart ZMS-206US-4: handle proprietary status reports (@zemismart-dev)
#13267 Zosung: honor OFF when stopping IR learning (@zemismart-dev)
#13244 Aqara W600: improve external temperature handling (@nilvanis)
#13233 Onesti Products AS locks: PIN code format, source 0x05, capability attributes (@fredrik-lindseth)
#13229 Schneider Electric: declare hvacThermostat 0xE012 (open window detection status) (@mberglun)
#13238 ShinaSystem CSM-300ZB_V2: rename transaction to transaction_interval (@rusty-art)
#13254 SONOFF S60ZBTPF/S60ZBTPG/BASIC-ZB1GSP/S61SZBTPB: mark outlet_control_protect as config entity (@arnepluhar)
#13246 SONOFF ZBDongle-P: add as whitelabel of Custom devices (DiY) ti.router (@alichaudry)
#13224 Develco SPLZB-137/SPLZB-141: fix continuous acFrequency reporting (@mberglun)
[#13219](https:...

Contributors

DMajrekar, mistic100, and 128 other contributors

Assets 2

2 Join discussion

2.14.1

Koenkk released this 03 Sep 19:03

2.14.1

3c3d8c1

Notes

This hotfix release fixes several issues where cover states were inverted (e.g. #33004, #33014 and #33010)

Fixes

#33006 Home Assistant: add state class for formaldehyde (@Wheemer)
#33003 Home Assistant: fix some cover exposes (@feixm1)
#13090 HOBEIAN ZG-IR01: fix temperature scaling when temperature_unit is fahrenheit (@bapesupreme)
#13075 Schneider Electric S520567: fix entities postfixed with _cover (@Koenkk)
#13089 SONOFF: BASIC-ZB1GSP: reverse energy exposes by firmware version (@CubeZ2mDeveloper)
#13092 Tuya TS0301_cover_1: expose battery (@vajonam)
#13086 Fix cover state reversing open/close buttons for coverInverted devices (@ThatDeltaGuy)
#13073 Legrand 067797: keep on/off working in dimmer_off (relay) mode (@lorenzomigliorero)
#13077 Manhot: add new modelIds (@ingjteng)
#13087 Schneider Electric S520567: restore cover state (@kinorai)
#13081 Tuya: fix power-on behaviour not available (@artt)
#13065 Ubisys: add convertGet for configure_device_setup so input actions/configs can be read back (@SamHartleyFixes)
#1860 Add fingerprint for zbt-1 (@Nerivec)

New supported devices

This release adds support for 7 devices:

#13076 R12LM-Z20T Lincukoo Human Motion & Presence Sensor (@joliam)
#13076 B08LRT-Z10T Lincukoo 5in1 Sensor Button Switch (@joliam)
#13076 PZE2612 Lincukoo Outdoor Smart Plug (@joliam)
#13085 TS0601_6gang_switch_2 Tuya 6 gang touch panel switch with power monitoring and configurable indicator colors (@hammondses)
#13093 ZNMHLDJ01LM Aqara Smart vertical blinds motor H1 (@airlychee)
#13084 RDZ101ZB Siemens Connected Home wireless room thermostat (@Cm0n89)
#13078 ZCMR-1 Nova Digital Roller blind motor (@caio-emoraes)

Fixed device detections

#13079 Detect _TZ3210_rnj5wxxg as ECODO ECD-SS12 (@isaackennylee)

Contributors

vajonam, artt, and 17 other contributors

Assets 2

2.14.0

Koenkk released this 01 Sep 18:00

2.14.0

62b02e2

Features

#32765 Allow to preserve device config when removing device (@cmiguelcabral)

Improvements

#13068 Bosch BTH-RM230Z: add humidity alarm led toggle (@akarikuu)
#13062 PushOk Hardware POK001: support offline_action and inverted (@zombierzn)
#13055 Rti-Tek STHZB: add STH2Z support (@QuAnnan2019)
#13053 Schneider Electric CCTFR6400: expose hub-less operation (cluster registration, read responses, boost) (@PCR-2020)
#13060 Tuya SPM02V1-GT: expose ac_frequency (@SamHartleyFixes)
#13001 Add nerivec's smlight router variants (@Nerivec)
#13006 Aqara KD-R01D: expose level configuration (@k-lofnes)
#12979 Aqara: expose identify cluster on seven devices (@krobipd)
#12977 EGLO 900024/12253: expose identify cluster (@krobipd)
#12978 L&S Lighting 756200027: expose identify cluster (@krobipd)
#12976 LEDVANCE 4099854295232/4099854293276: expose identify cluster (@krobipd)
#13004 Make Tuya time sync configurable (@andrei-lazarov)
#13002 Moes ZS-SF-EUC-WH-MS: expose more features (@jaimebarez)
#12971 Namron Zigbee Edge Thermostat: expose writable sensor_mode (@papatistos)
#12999 Shelly BLU TRV: add external occupancy support (@Burki24)
#12975 Shelly: expose identify cluster (@krobipd)
#13028 SONOFF BASIC-ZB1GSP: support export-energy (@CubeZ2mDeveloper)
#13016 SONOFF SNZB-02DR2: improve support (@CubeZ2mDeveloper)
#13017 SONOFF SNZB-02UL: improve support (@CubeZ2mDeveloper)
#12997 SONOFF TP-WGZBA: hysteresis and time period exposes (@CubeZ2mDeveloper)
#12974 StuckAtPrototype AirCube: expose identify cluster (@krobipd)
#13012 Support HVAC clusters in definition generator (@kirovilya)
#12980 Tuya TS011F_with_threshold, COOLO CS-201Z: expose identify cluster (@krobipd)
#12941 Fix IAS max_duration limits and move to modernExtend (@andrei-lazarov)
#12958 SONOFF SNZB-06P24: improve description (@CubeZ2mDeveloper)
#12938 Ubisys: Expose identify cluster (@burmistrzak)
#12919 Expose Power-on behavior in generated support (@andrei-lazarov)
#12933 Heiman HS2NVL and HS2VDT: support more features (@Leo2442926161)
#12905 Philips Hue: Expose identify cluster (@burmistrzak)
#12908 Excellux EZ-500FL: expose fertility_calibration (@iotRobot)
#12906 HEIMAN S1-TL: expose shielding_sensor_detection (@Leo2442926161)
#12901 Heiman S1-TL: expose alarm_state (@Leo2442926161)
#12872 Ubisys J1: Add operational_status converter (@burmistrzak)
#12834 Philips 929002376101: support effects (@Foldman)
#12799 Schneider Electric S520567: expose more features (@Zehir)
#1837 Accept the Control4 custom profile ID on the EZSP adapters (@bharat)

Fixes

#32791 Apply debounce to messages without payload (@ChillZwix)
#32937 Clamp availability ping delay to the maximum supported timeout (@venglin)
#32784 Fix crash on a null color in attribute output (@luantaraschi)
#32780 Fix stringify don't emit invalid JSON for an empty typed array (@luantaraschi)
#32779 Fix stringify emit every element of a typed array (@luantaraschi)
#32752 Home Assistant: avoid duplicate door names (@clemencov)
#32702 Home Assistant: fix motor_state not exposed for SONOFF MINI-ZBRBS (@AT0myks)
#32842 Home Assistant: Improve various discovery mappings (@burmistrzak)
#32900 Preserve duration in state (@luantaraschi)
#32685 Replace express-static-gzip and finalhandler with srvx (@cany748)
#32684 Replace object-assign-deep with local utility (@cany748)
#32975 Require Node <=26.2 for serialport (@Koenkk)
#32928 Warn when setting unsupported device option (@andrei-lazarov)
#13064 Legrand 067797: fix transition not working (@SamHartleyFixes)
#13066 Level_config convertGet: fix logs discarded read errors at debug (@SamHartleyFixes)
#13058 Zemismart ZMZ609-2: fix date/weather sync (@lboue)
#13049 Tuya PJ-1203A: Ignore proprietary messages (@AndreKR)
#13036 Fix unspecified error with unknown Parameter in utils.ts (@asgothian)
#12953 Konke KK-WA-J01W-2020: add battery support (@CCZU1623)
#12968 Publish button hold length as action_duration, not duration (@luantaraschi)
#12960 SONOFF MINI-ZBRBS and SWV-ZF* / ZN* OTA matching (@CubeZ2mDeveloper)
#13018 Aqara SP-EUC01: enable event mode during configure (@LucaFriedrich)
#13019 Dowsing & Reynolds DR3000: configure reporting (@andrei-lazarov)
#12987 Dresden Elektronik BN-600085: remove unsupported battery expose (@ftonat)
#12988 FrankEver FK-BV05: correct water consumption unit and enum datapoints (@gluoncompany)
#12986 HEIMAN S1-TL: separate the reading (@Leo2442926161)
#13007 Legrand K4027C: improve moving state detection (@managerfx)
#12982 Namron 4512763: expose battery (@asmundg)
#12984 Namron 4512792: fix power and current scaling (@mariusvollen)
#13020 NodOn SIN-4-2-20: fix wired input reporting on endpoint 1 (@nthiers)
#13022 Philips 929003856201: remove color temperature (@andrei-lazarov)
#12945 Populate multiEndpointSkip in generateDefinitions (@luar123)
#12989 Profalux MAI-ZTM20C: fix configure failing (@hostekevin)
#12998 SONOFF TRVZB: filter out invalid 0 value for TRV timer_mode_target_temp (@CubeZ2mDeveloper)
#13014 Tuya EZ-104UPT: change uv_...

Contributors

bharat, mrvdb, and 123 other contributors

Assets 2

10 Join discussion

2.13.0

Koenkk released this 01 Aug 05:54

2.13.0

fcbb7ff

Notes

In #32508, support for Node.js 20 has been removed due to end-of-life status. If you run Zigbee2MQTT on bare metal, please upgrade to Node.js 24 or 26.

Features

#32631 Add clear_cache option to device remove request (@Nerivec)
#32625 Home Assistant: add discovery support for Tuya infrared receiver (learn mode) and emitter features (@jbouwh)

Improvements

#12757 SONOFF SNZB-09P: improve battery handling and expose more alarm options (@CubeZ2mDeveloper)
#12787 Sunricher dimmers: add minimum PWM (@niracler)
#12764 Philips Hue plugs: expose Power-on behavior (@andrei-lazarov)
#12523 NodOn SDO-4-1-00:add configureReporting for ssIasZone/zoneStatus (@nthiers)
#12548 NodOn SEM-4-1-00: add energy reset, configureReporting and apparent power (@nthiers)
#12733 Shelly Presence Gen4 (S4SN-0U61X): full sensor and zone configuration (@krobipd)
#12758 Third Reality 3RDS17BZ: expose delay_open (@3reality-support)
#12727 SONOFF SONOFF SNZB-02B/02M/02UL: add dewpoint and VPD (@CubeZ2mDeveloper)
#12659 Shelly WS90: expose solar capacitor voltage (@sschwieb)
#12690 EWeLink CK-BL702-MSW-01(7010) / Mumubiz CZV20: expose countdown auto-off timer (@juslex)
#12670 Shelly WS90: expose battery voltage (@andrei-lazarov)
#12687 SONOFF SWV Gen 2: add unified imperial gallon support (@CubeZ2mDeveloper)
#12691 Tuya TS0002_power: expose per-endpoint countdown auto-off timer (@juslex)
#12662 Aqara SSWQD22LM: support more features (@blakegong)
#12665 Philips 929004308301: support color (@mrtncode)
#12654 Wiren Board WB-MSW-ZIGBEE_v.4_official: expose IR transceiver controls (@u236)
#12634 Zozung/Tuya based IR blasters: add support for Home Assistant infrared timings (@jbouwh)
#1825 Handle special in ZCL spec (@Nerivec)
#1819 Allow to remove device from cache on request (@Nerivec)

Fixes

#32535 experimental_event_entities and legacy_action_sensor require restart (@andrei-lazarov)
#32662 Avoid running resolveDefinition in parallel (@luar123)
#32619 Drop redundant types js yaml (@cany748)
#31947 Fix restartRequired flag (@andrei-lazarov)
#32603 Home Assistant: discover device trigger when mqtt output = attribute_and_json and add warnings about incompatible settings (@andrei-lazarov)
#32544 Home Assistant: fix action published to wrong topic (@luar123)
#32676 Publish groups on device leave (@Nerivec)
#32486 Refresh exposes after manual device configure (@MaxRink)
#32643 Remove json-stable-stringify-without-jsonify dep (@Nerivec)
#32683 Replace jszip with fflate (@cany748)
#32579 Replace rimraf with native fs.rmSync (@cany748)
#32620 Replace source-map-support with native Node source map support (@cany748)
#32508 Support Node 26, remove Node 20 support (@Koenkk)
#12770 Schneider Electric: fix dimming mode (@svhelge)
#12812 Shelly 1/1 Mini, 1PM/1PM Mini: merge identical variants into whitelabels (@krobipd)
#32703 Sinopé TH1400ZB: expose floor_temperature and room_temperature (@Koenkk)
#12814 SONOFF ZBM5: fix configure failing (@andrei-lazarov)
#12818 Tuya _TZ3000_w0qqde0g and _TZ3000_typdpbpg: remove switch_type_button (@andrei-lazarov)
#12817 Tuya TS011F_plug_1: fix current scale (@andrei-lazarov)
#12801 Tuya TS0601_water_valve and TS0601_water_meter: fix battery voltage expose (@Liionboy)
#12791 Expose Tuya infrared learning ir code switch as button to Home Assistant (@jbouwh)
#12772 LEDVANCE 4099854295232/4099854293276: silence periodic divisor-constant reports (@krobipd)
#12802 Namron 4512758: expose Namron custom attributes (@svhelge)
#12805 RTX ZVG1: Enable Tuya time sync (@andrei-lazarov)
#12811 Shelly S4SN-0071A/S4SN-0071Z: merge Flood and Flood S into one definition (@krobipd)
#12804 Smarthjemmet.dk devices: make switchType writable (@mortenmoulder)
#12795 Somfy Glydea: fix incorrect position reported (@darkl0rd)
#12793 Tuya AY-204Z: fix occupancy and battery reporting (@minorMismatch)
#12798 Tuya TS011F_with_threshold: change min over_voltage_threshold range to 90 (@galvesribeiro)
#12808 Wirenboard WB-MSW-ZIGBEE v.4: correct CO2 unit (@u236)
#12789 Haozee HZ-SL10: fix light sensor DP commands (@13717033460)
#12782 Nous L14: query on device announce (@andrei-lazarov)
#12769 Shelly: remove shellyPowerFactorInt16Fix (@hpuac)
#12778 Simplify template on infrared receiver entity to avoid warnings when the value is reset (@jbouwh)
#12777 Smarli S-ZB-COV1-R251: disable unintended optimistic write of cover position (@loocd)
#12774 Sonoff MINI-ZBRBS: add missing 'none' (0) value for motor_travel_calibration_action (@bueste)
#12771 Tuya IR: clear last published timings and add override option for HA value_template (@jbouwh)
#12760 HOBEIAN ZG-302ZM: fix auto on/off lookup (@nico1080)
#12738 Fix vendor casing to prevent duplicates (@andrei-lazarov)
#12737 Improve infrared emitter description (@jbouwh)
#12729 NodOn SIN-4-1-20/SIN-4-1-21/SIN-4-2-20: fix wired input, endpoint 242 and identify (@nthiers)
#12736 Shelly 2PM Gen4: switch input mode is mapped to the wrong endpoints in switch mode (@krobipd)
#12747 Shelly Gen4: harden switch and button input handling (@krobipd)
#12735 Shelly Gen4: stop offering settings the device cannot report (@krobipd)
#12732 Shelly Gen4: stop reading through the RPC cluster (@krobipd)
#12749 Shelly Gen4: write only the given Wi-Fi fields (@krobipd)
#12748 Shelly WS90: discar...

Contributors

felipemathies, PaulMcMillan, and 84 other contributors

Assets 2

6 Join discussion

2.12.1

Koenkk released this 01 Jul 06:04

2.12.1

aa909a8

Improvements

#12566 IKEA E2134: support on duration, trigger condition (@jeslinmx)
#12583 OWON PIR313-E: expose battery percentage and configure reporting (@gluoncompany)
#12572 SONOFF SNZB-02LD: support OTA (@myyorick)
#12559 SONOFF TRV-ZBT: support multi-schedule group, valve calibration, and history improvements (@CubeZ2mDeveloper)
#32059 Aqara DS-K02D/DS-K02E: fix stale actions being published (@Koenkk)
#1210 Aqara UT-A01E: support OTA (@Koenkk)
#12498 Bosch RM230Z: make HA climate modes configurable (@MaxRink)
#12535 HEIMAN M1-PE : expose temperature and humidity (@Leo2442926161)
#12531 Mark meter voltage telemetry diagnostic for HA (@MaxRink)
#12533 Yoolax TS0301_dual_rail_2: real-time position and separate rail covers (@msitt)
#12508 Bosch RM230Z: expose weekly schedule (@MaxRink)
#12497 Shelly 2PM: make cover tilt configurable (@MaxRink)
#12493 Develco ZHEMI101: improve integration (@derabbink)
#12465 Shelly gen4: add button mode scene actions (single/double/triple/hold) (@SebiGo)
#12463 SONOFF SNZB-02DR2: expose temperature_sensor_select and external_temperature (@shaggyone)
#12448 Tuya TS130F_xbexmf8h: expose switch type (@andrei-lazarov)
#12434 Heiman S1RM-E: add alarm muted state at low level of alarm and pre-heating state (@Leo2442926161)
#12441 Tuya TS130F cover controllers: expose switch type (@andrei-lazarov)
#12412 Heiman: add reading temperature, humidity and co attributes during paring (@Leo2442926161)
#12385 Add support for Namron Zigbee Edge Thermostat (4566702/4566703/4512783/4512784) (@xses79)
#12411 OWON: support more variants (AC201P_019E, AC221_019E, DWS332-E) (@jacky202509)
#12420 Schneider Electric CCT5010-0003: add switchActions and remove support for power on behaviour (@svhelge)
#1800 Support for EmberZNet 9.1.0 (EZSP v19 / v2026.6.0) (@Nerivec)
#1797 Support for Sonoff Dongle-PP10 auto-discovery (@CubeZ2mDeveloper)

Fixes

#32417 Add mqtt.server_name option to override TLS SNI (@rohankapoorcom)
#32311 Docker: bump alpine from 3.23 to 3.24 (@dependabot[bot])
#32356 Home Assistant: add conductivity discovery for soil_fertility (@danielbrunt57)
#32361 Home Assistant: allow discovery user overrides to win over converter (@MaxRink)
#32380 Home Assistant: apply expose-level Home Assistant discovery metadata (@MaxRink)
#32439 Home Assistant: mark device settings as config (@Komzpa)
#32377 Home Assistant: mark legacy action sensors diagnostic (@MaxRink)
#32378 Home Assistant: mark thermostat configuration switches as config (@MaxRink)
#32379 Home Assistant: pass device options to HA discovery overrides (@MaxRink)
#32411 Home Assistant: support cooling setpoint in climate discovery (@kirovilya)
#32392 Home Assistant: unit conversion for derived weather sensors by restoring device_class with name preservation (@danielpetrovic)
#32255 Improve zigbee2mqtt maintenance path (@quyentonndbs)
#32258 Republish bridge/state online when HA comes online (@kryoz-ddp)
#12545 Tuya TS011F_plug_1 _TZ3008_reatplte: report correct voltage/power (@Nirostar)
#12577 Aqara PS-S04D: adjust min/step values for absence delay timer (@absent42)
#12574 Legrand 067772: expose as switch (@svhelge)
#12581 Schneider Electric 41EPBDWCLMZ/354PBDMBTZ: expose level_config (on_level, current_level_startup) (@bdnstn)
#32423 Tuya TS011F_with_threshold: fix over current and under voltage limits (@Koenkk)
#12554 Bacchus Mercury_3ph_Counter: expose energy_combined (@Bacchus777)
#12511 Heimgard SLM-2: fix volume levels (@bskjon)
#12553 Scneider Eletric MEG5116-0300/MEG5171-0000 and WDE002386: expose flash_on_click indicator_mode (@lajtmaN)
#12550 Shelly: fix Wi-Fi readback via RPC fallback (@MaxRink)
#12560 SONOFF SNZB-09P: fix alarm duration not applied on first automation trigger (@CubeZ2mDeveloper)
#12552 Tuya _TZ3000_yi0n4xfd: expose temperature and temperature_threshold (@Koenkk)
#12557 Tuya TS0601_smart_scene_knob: Allow brightness 255 (@andrei-lazarov)
#12513 Bosch RN230Z: make relay support optional (@MaxRink)
#12509 Handle named custom raw attribute responses (@MaxRink)
#12547 NodOn SDC-4-1-00: fix dry contact sensor (inverted logic, wrong attribute, add reporting) (@nthiers)
#12525 Shelly: fix switch input endpoint discovery (@MaxRink)
#12541 Tuya _TZ3290_gnl5a6a5xvql7c2a: remove battery (@andrei-lazarov)
#12532 Tuya TS0505B_1: add Emos white-labels (@Golbinex)
#12540 Wyze WLCKG1: prevent stale raw frames (@dkneeland)
#12514 Mark battery state exposes as diagnostic (@MaxRink)
#12510 SONOFF SWV-ZNE: expose valve settings as scalar controls (@MaxRink)
#5266 SONOFF SWV: update valve_work_state description (@Koenkk)
#12512 ThirdReality 3RSM0147Z: soil moisture fallback (@MaxRink)
#5255 Tuya TS0505B_1: add Hatsy SDL-312Z whitelabel (@Koenkk)
#12526 Type HA discovery override options (@MaxRink)
#12505 Excellux ZG-104PLV: fix expose presence as binary occupancy (@nielsbauman)
#12496 GIEX QT06_2 : fix irrigation time exposes (@Domi920)
#32342 L&S Lighting 756200643: remove unsupported battery expose (@Koenkk)
#12491 Lupus 12050: fix electrical measurement values (@derabbink)
#11605 Ronco RM28-LE: improve integration (@fals3illusion)
#12506 Shelly S4SN-0U61X: discover presence zones (@MaxRink)
#12495 SONOFF SWV: allow partial water valve composite settings (@MaxRink)
[#12488](https://github.com/Koenkk/zigbee-herdsman-converters/issu...

Contributors

oddeirik, wingrunr21, and 89 other contributors

Assets 2

2 Join discussion

2.12.0

Koenkk released this 09 Jun 19:08

2.12.0

fd8bafc

Notes

This hotfix release fixes the MALFORMED_COMMAND error when updating Philips Hue devices (#32168)

Features

#32022 Add ability to abort running OTA (@Nerivec)

Improvements

#12378 Aqara FP1: expose configured regions (@mayongze)
#12404 Plugwise 170-01: OpenTherm controls, battery type, product variant (@SaiPraveen22)
#12400 Third Reality 3RVS01031Z: support more features (@3reality-support)
#1778 Support for Frient install codes (@burmistrzak)
#1759 Add ability to abort running OTA (@Nerivec)
#1762 Enable APS layer encryption for Zigbee Direct cluster operations (@burmistrzak)

Fixes

#12383 Aqara FP300 (PS-S04D): configure reporting for presence and PIR (@drauziooppenheimer)
#12391 EGLO 901463: mark as whitelabel of EBF_RGB_Zm (@panther7)
#12392 IKEA VINDSTYRKA: Allow reading VOC index (@andrei-lazarov)
#12397 IOTPerfect PF-PM02D-TYZ: expose fault (@andrei-lazarov)
#12402 Moes SYT-ZB01: fix rotation events (@andrei-lazarov)
#12379 Moes ZS-SR-EUC: fix incorrect position (@javivarguitas)
#12396 Moes ZWV-YC: fix device not controllable (@FranzFelberer)
#12381 Move various device specific converters from fromZigbee.ts and toZigbee.ts (@svhelge)
#12398 Schneider Electric WDE002386: fix configure failing (@svhelge)
#12377 Sonoff SNZB-04PR2: fix battery voltage reporting (@N3rdix)
#12387 Tuya TS0601_vibration_alarm_sensor: improve UX and clean code (@andrei-lazarov)
#12395 Use coord address when gppNwkAddr not present in GP frame for tempMaster (@Nerivec)
#12368 Add Tuya _TZE2841000000_0ints6wl and _TZE2841000000_hdml1aav (@iotRobot)
#12367 Develco SPLZB-132: set powerOnBehaviour to false (@svhelge)
#12346 GIEX GX06: add soil sensor brightness level (@Giexperience)
#12372 Move various device specific converters from fromZigbee.ts and toZigbee.ts (@svhelge)
#12365 Efekta: correction of measurement units (@smartboxchannel)
#12362 Heiman HS1RM-EF: add private cluster (@Leo2442926161)
#12360 Move various device specific converters from fromZigbee.ts and toZigbee.ts (@svhelge)
#12363 Third Reality: rename 3rCO2SensorCluster to 3rAirQualitySensorCluster (@3reality-support)
#12361 Tuya _TZE284_waa352qv: fix state datapoint (@pvela2017)
#1774 Ember: skip backup devices without a link key in FORM_BACKUP (@evertide)
#1776 Zoh: only close port (if needed) on init port failure (@Nerivec)
#1771 DefaultRsp matching for OTA (@Nerivec)
#1763 Zboss: keep onPackage active during inReset (@tostmann)

Frontend

#567 fix: add some energy icons (@andrei-lazarov)
fix: catch fetch errors when opening device docs tab
#572 feat: add ability to abort OTA (@Nerivec)

New supported devices

This release adds support for 17 devices:

#12388 140F1170 DEVI DEVIreg InControl floor heating thermostat (@efoverskov)
#12370 BL82-TYZ1 Manhot Cover motor LPD (@ingjteng)
#12370 MH03-1Z-OLED Manhot OLED Screen Switch 1 Gang (@ingjteng)
#12370 MH03-2Z-OLED Manhot OLED Screen Switch 2 Gang (@ingjteng)
#12370 MH03-3Z-OLED Manhot OLED Screen Switch 3 Gang (@ingjteng)
#12370 MH03-4Z-OLED Manhot OLED Screen Switch 4 Gang (@ingjteng)
#12370 MH03-6Z-OLED Manhot OLED Screen Switch 6 Gang (@ingjteng)
#12370 MH03-8Z-OLED Manhot OLED Screen Switch 8 Gang (@ingjteng)
#12376 MAI-ZTP20F Profalux Cover remote (@TO19)
#12389 THAH202001 THALEOS Thermostatic radiator valve (@Uxzylon)
#12382 TS0301_dual_rail_2 Tuya Top-down bottom-up single control shade (@Sinaloit)
#12380 TS0726_4_gang_switch_and_4_scene Tuya Multi 4 gang switch and 4 scene with backlight (@jasonj27)
#12047 ZB-RS232 easyiot Zigbee to RS232 controller (@xsp1989)
#12047 ZB-LTH01 easyiot Zigbee light and temperature sensor (@xsp1989)
#12386 ZWSM16-DC-1 AVATTO Smart ZigBee Dry Contact Switch Module (@panther7)
#12403 ZWT100 AVATTO Zigbee Thermostat (@alblcl)
#12369 ECO-DIM.06-ZGB EcoDim Plug in dimmer Zigbee, Phase cut-off(Trailing Edge R,C) (@Rico-E)

Fixed device detections

#12390 Detect _TZ3000_sj7jbgks as Moes ZT-B-EU3 (@panther7)
#12384 Detect _TZE200_y8jijhba as HOBEIAN ZG-204ZE (@lrljoe)
#12374 Detect _TZE284_sdvbnmj5 as Novato ZPV-01 (@bilgi-source)
#12401 Detect 929003099202 as Philips 929003099001 (@smonsi)

Contributors

Sinaloit, tostmann, and 29 other contributors

Assets 2

2.11.0

Koenkk released this 01 Jun 18:41

2.11.0

2b5a670

Notes

External extensions and external converters are now disabled by default for new installations. You can enable them using the configuration enable_external_js in advanced section. See more details.

Features

#31826 Allow to disable external JS extensions (@Nerivec)

Improvements

#12313 Heiman HM-636THV-AC-M: expose more features (@Leo2442926161)
#12335 NodOn SEM-4-1-00: expose power_apparent (@Paulo-89)
#12341 PushOk POK019: expose additional window handle status values (@zombierzn)
#12325 Scimagic 1-ZB-WSD: expose more features (@nilservice)
#12298 Schneider Electric CCT595011: expose sensitivity_level (@svhelge)
#12283 Moes ZWV-YC: expose countdown, battery_state and error_status (@FranzFelberer)
#12265 Third Reality: expose led_brightness (@3reality-support)
#12250 Aqara DWZTCGQ11LM: support static action (@absent42)
#12240 Candeo C203, C204, DM204 and DM204v2: add minimum brightness level setting (@candeodevelopment)
#12167 Aqara W600: expose running_state from valve position (@nilvanis)
#12188 Philips 929003017102: enable OTA (@mundschenk-at)
#12164 Shelly S4SN-0071A: expose trouble (@yo3gnd)
#12166 Tuya circuit breakers: refactor breaker fault (@GrumpyMeow)
#12162 Woolley BSD29/BSD59: expose power on behaviour (@Xplouder)
#1732 Add parsing for more GreenPower frames (@Nerivec)
#1761 Add support for Zigbee Direct cluster (@Nerivec)

Fixes

#31930 Use Jinja-safe property access in HA discovery templates (@yo3gnd)
#32054 Fix default value of "optimistic" group setting (@andrei-lazarov)
#32037 Prevent invalid external JS file name on save (@Nerivec)
#31930 Use Jinja-safe property access in HA discovery templates (@yo3gnd)
#12355 Nous D4Z: expose alarms configuration (@andrei-lazarov)
#12356 Profalux MOT-C2Z10: fix fingerprint (@residentphil74-hub)
#12354 Shelly 2PM Gen4 (Cover mode): fix fingerprint for firmware 2.0.0-beta1 (@hoellen)
#12303 Tuya ZY-ZHPS01-24G: correct presence parser and add dis_current polling (@rafieshaki)
#12344 Acova Alcantara 2 and Alcantara 3: don’t expose local temperature value (@DeadlockState)
#12352 Fallback to transition device option with hue_native_control (@burmistrzak)
#12350 Samotech SM323_v1: update description (@fidusachates)
#12339 Tuya _TZE284_uqfph8ah: expose more features (@pvela2017)
#32145 Tuya TS0601_bed_presence_sensor: fix illuminance unit (@Koenkk)
#12331 Acova Alcantara 2 and Alcantara 3: remove local_temperature expose (@DeadlockState)
#12333 Namron 512782 / 4512781 / 4566700 / 4566701: update description (@xses79)
#12340 Namron: add custom attributes to hvacThermostat cluster and improve typing (@svhelge)
#12334 Sonoff SNZB-02B: remove unsupported exposes (@CubeZ2mDeveloper)
#12267 Acova Alcantara 2 and Alcantara 3: fix system mode and off mode display (@DeadlockState)
#12328 Develco KEYZB-110: fix buzzer not working with firmware v2.0.6 (@MrZwickie)
#12312 HEIMAN HS1RM-E: update switch type cluster (@Leo2442926161)
#12309 Lincukoo CZF02: improve UX (@andrei-lazarov)
#12310 Lonsonho ZB-RGBCW: enable reporting (@andrei-lazarov)
#12307 Move Tuya specific converters from fromZigbee.ts and toZigbee.ts (@svhelge)
#12326 Samotech SM323_v2: update description (@fidusachates)
#32125 Tuya TS011F_din_smart_relay_polling: ignore temperature report (@Koenkk)
#12321 Tuya: fix various humidity and temperature values (@iotRobot)
#12304 Datek HLU2909K: refactor (@svhelge)
#12199 Disable reporting for device temperature (not reportable according to spec) (@Koenkk)
#12302 Refactor device specific converters (@svhelge)
#12292 Tuya QS-Zigbee-SEC01-DC / QS-Zigbee-SEC01-U: add reporting (@andrei-lazarov)
#12276 Hive SLR1d: fix state not reporting (@si458)
#12284 Inovelli: parse mmWave target id as int8 per updated docs (@rohankapoorcom)
#12134 Inovelli: split m.device into m.parameters/ledEffects/buttonTaps (@rohankapoorcom)
#12278 Philips 9290022169: Fix color temp range (@andrei-lazarov)
#12272 Refactor device specific converters (@svhelge)
#12266 Shelly S4SN-0071A: fix configure failing (@Koenkk)
#12273 SOMFY 5163664A: add whitelabel (@mikeodr)
#12260 Eglo 99099: improve remote controller support (@fpsal)
#12268 Refactor device specific converters (@svhelge)
#12228 Schneider Electric CCT711119: refactor to modern extend (@svhelge)
#12262 Tuya MG-GPO04ZSLP: fix control (@andrei-lazarov)
#12218 GIEX GX03: various improvements (@PavelKrassikov)
#12256 Hue: stop unwanted state reports (@andrei-lazarov)
#12252 Legrand: refactor converters (@svhelge)
#12258 Moes ZC-LS02: fix integration (@pranjal-joshi)
#12261 Refactor Kmpcil, Leedarson and Salus Controls converters (@svhelge)
#12255 Sunricher: remove minimum PWM debug logs (@niracler)
#12224 Eurotronic: move converters, introduce custom clusters, and enforce stronger typing (@svhelge)
#12231 Legrand 412170: force device_mode to switch on configure, add missing 'identify' expose (@alexhk)
#12223 Databyte: move converters to databyte.ts (@svhelge)
#12226 EKO097xx: move converters to schneider-electric.ts (@svhelge)
[#1223...

Contributors

mikeodr, sjorge, and 81 other contributors

Assets 2

9 Join discussion

2.10.1

Koenkk released this 07 May 17:46

2.10.1

94751ab

Notes

This hotfix release fixes several Tuya device attributes that were not updating or writable (#31851, #31835, #31850)

Improvements

#12096 Shelly 1 Gen 4: support switch_mode and switch_type (@SebiGo)
#12127 Tuya ERS-10TZBVK-AA: expose action_brightness_delta and action_color_temperature_delta (@TheUnlimited64)
#12105 Tuya TS0601_multifunction_switch: add inching, indicator mode, fix dp in timer device (@ohadvano)
#12074 Excellux ZG-104PLV: expose vibration_count (@iotRobot)
#12115 Plugwise 170-01: expose max/min heat/cool setpoint limit (@michelotten)
#12116 SONOFF MINI-ZBDIM: expose max brightnes threshold (@storm1ng)
#12124 Tuya TS0601_pir_solar: expose alarm_time and alarm_mode (@andrei-lazarov)
#12087 Hue: always add 'sunrise' to effects list (@Mihonarium)
#12086 Shelly Power Strip 4 Gen4 (S4PL-00416EU): add per-socket power_on_behavior (@coyotte508)

Fixes

#31845 Replace deprecated url.parse (@Nerivec)
#12135 Heiman HS1RM: add switch type and fix diagnostic issue (@Leo2442926161)
#12137 Plugwise 170-01: add entity category to min/max heat/cool setpoint limits (@michelotten)
#12125 Move _TZ3000_cziew6eu to TS0726_3_gang_scene_switch (@andrei-lazarov)
#12103 Novato ZIS-01P: add datapoints (@andrei-lazarov)
#12114 Plugwise 170-01: improve reporting configuration (@michelotten)
#31851 Tuya TS130F and Moes MS-108ZR: fix various attributes not updating (@Koenkk)
#31916 Tuya: fix UNSUPPORTED_CLUSTER when setting switch_type (@Koenkk)
#12109 Danfoss: rename adaptionRunControl state none to idle (@storm1ng)
#12094 Develco EMIZB-132: expose producedEnergy (@svhelge)
#12036 Inovelli: clean up biome-ignore comments (@rohankapoorcom)
#12095 Legrand/BTicino K4003C: fix broken state reporting (@murarustefaan)
#12093 Novato ZIS-01P: fix datapoints (@bilgi-source)
#12090 Philips Hue: fix native transition time (@Mihonarium)
#12100 Tuya _TZB210_rs0ufzwg: fix state lost after on -> off -> on (@Goldmensch)
#12091 Tuya TLC2206: fix power source (@andrei-lazarov)
#31835 Tuya TS0505B_2: fix color not exposed (@Koenkk)
#12102 Tuya: fix various attributes not writable (@Koenkk)

New supported devices

This release adds support for 18 devices:

#12123 C-ZB-DM204V2 Candeo Zigbee micro smart dimmer (@candeodevelopment)
#12123 C-ZB-SM30-2G Candeo Smart 2 gang switch module (@candeodevelopment)
#12113 WKE502Z DAEWOO Smart Zigbee keypad with RFID badge reader (@mickadam29)
#12112 929004611102 Philips Hue Flux Outdoor strip light (10m) (@fs79)
#12099 ZIS-03 Novato 24 GHz radar human presence sensor with relay output (@bilgi-source)
#12099 ZIS-04 Novato 24 GHz radar human presence sensor with relay output (@bilgi-source)
#12081 Ensystec-Leak-Protect-Zigbee Ensystec Leak protect controller with Zigbee module (@slacky1965)
#12083 QAIRZM2 QA Zigbee smart IR remote control (@queroautomacao)
#12085 Ref 2117 Lotus 4 gang plug + 4 USB (@rftafas)
#12080 RINN WSER40 RINNconnect Roller Controller (@onewaylifestreet)
#12089 TS0601_1gang_switch Tuya 1 gang touch panel switch with backlight and child lock (@ohadvano)
#12089 TS0601_cover_switch_2 Tuya 2 gang switch and cover control touch panel with backlight and child lock (@ohadvano)
#12089 TS0601_3gang_switch Tuya 3 gang touch panel switch with backlight and child lock (@ohadvano)
#12089 TS0601_6gang_switch Tuya 6 gang touch panel switch with backlight and child lock (@ohadvano)
#12089 TS0601_multifunction_switch Tuya 1 gang touch panel switch with backlight color modes, child lock, timer, and brightness (@ohadvano)
#12089 TS0601_power_monitoring_switch Tuya Touch panel switch with power monitoring and timer (@ohadvano)
#12089 TS0601_2gang_switch Tuya 2 gang touch panel switch with backlight and child lock (@ohadvano)
#12089 TS0601_stairwell_switch Tuya 1 gang stairwell switch with child lock (@ohadvano)

Fixed device detections

#12126 Detect _TZ3000_hurauima as Tuya TS0726_4_gang_scene_switch (@andrei-lazarov)
#12121 Detect AY-302Z as COOLO CS-201Z (@zyjsmile857)
#12106 Detect _TZ3000_yujem9ee as Tuya TS0201_2 (@andrei-lazarov)
#12039 Detect AY-303Z as COOLO CS-201Z (@zyjsmile857)
#12110 Detect ZBM-MG24 as Silabs series 2 router (@Nerivec)
#12098 Detect MOT-C2Z10 as MOT-CxZxxC/F and MAI-ZTP22C as MAI-ZTP2xC/F (@residentphil74-hub)

Contributors

coyotte508, queroautomacao, and 24 other contributors

Assets 2

2.10.0

Koenkk released this 01 May 17:30

2.10.0

4639243

Features

#31663 Home Assistant: add group entities in discovery config (@hoellen)

Improvements

#12045 Acova ALCANTARA3: add electrical measurement support (apparent power) (@maxiiss)
#12024 Aqara W600: add battery, valve alarm and open window indicators (@nilvanis)
#12022 Aqara W600: add schedule support (@nilvanis)
#12060 Datek Idlock: refactor (@svhelge)
#12068 Efekta: support more features for various devices (@smartboxchannel)
#12037 HEIMAN HS1SA-E Plus and HM 636: support temperature offset (@Leo2442926161)
#12011 Shelly 2PM Gen4: support switch mode (@SebiGo)
#12059 Shelly: Expose switch inputs and input mode configuration for Gen4 1/1PM/1PM Mini/2PM (@SebiGo)
#12040 Yale YMC420-W: expose action (@rubempoli)
#11991 Aqara W600: refactor implementation (@nilvanis)
#12026 Danfoss 014G2461: expose more features (@storm1ng)
#11655 Hue lights: support hue_native_control (@Mihonarium)
#11987 Aqara W600: add external temperature support (@nilvanis)
#11985 Danfoss Icon2: support OTA (@Maxxis20)
#11970 Plugwise 170-01: expose more features (@svhelge)
#11969 Add SLZB-06MG26U router variant (@Nerivec)
#11948 Mumubiz TYZGTH4CH-D1RF: expose inching switch (@DooMMasteR)
#11960 Third Reality 3RPL01084Z: expose color temp (@3reality-support)
#11870 Inovelli: add new dumb switch detection parameter (fw 3.07+) (@InovelliUSA)
#11938 Third Reality 3RDP01072Z: support red_led_brightness (@3reality-support)
#11883 Inovelli: add per-model firmware gating for device attributes (@rohankapoorcom)
#11912 Third Reality 3RPL01084Z: expose more features (@3reality-support)
#11861 Sinope TH1300ZB: expose floor_temperature and room_temperature (@arsenicks)
#11858 Danfoss 014G2461: expose scheduling functionality (@svhelge)
#11856 Shelly SBHT-103C: support light level (@benmaximov)
#11832 SONOFF SWV: expose more features (@vitalybibikov)

Fixes

#31668 Clarify units of pause_on_backoff_gt (@toastedcornflakes)
#31735 Improve transmit power description (@andrei-lazarov)
#12050 Danfoss Ally: automatically sync time after rejoin (@storm1ng)
#12032 Paulmann 500.45: remove color support (@andrei-lazarov)
#12075 Schneider Electric EKO07259 and WDE002497: simplify running state (@svhelge)
#12065 SONOFF S60ZBTPF and S60ZBTPG prevent threshold protections from being enabled on first pairing (@CubeZ2mDeveloper)
#12046 Thermostat modernExtend: support dontMapPIHeatingDemand (@svhelge)
#12056 Third Reality 3RSB01085Z: expose identify (@3reality-support)
#12043 Tuya _TZB210_u3ri0968: fix color reset when turning on (@posseydon6891)
#12054 Tuya TS004F: add whitelabel + expose voltage, identify (@andrei-lazarov)
#12071 Wirenboard WB-MSW-ZIGBEE v.4: register missing Sprut custom clusters (@AndreyKsenofontov)
#12016 AVATTO: rename various modules (@andrei-lazarov)
#12020 Develco EMIZB-132: fix no power reported (@svhelge)
#12018 Onokom: refactor to modernExtend (@svhelge)
#12028 Paulmann 500.48: remove color support (@karlbeecken)
#12023 Schneider Electric WDE011680: running state based on pi heating demand (@svhelge)
#12009 Tuya soil: fix datapoints (@andrei-lazarov)
#12019 Tuya TS0002_basic: configure on/off reporting (@Komzpa)
#11999 Lytko: refactor to modernExtend (@svhelge)
#31767 Tuya _TZE204_bvfld3xc: fix illuminance not working (@Koenkk)
#11993 SONOFF S60ZBTPF and S60ZBTPG: add labels for energy today, yesterday and month (@toastedcornflakes)
#11977 Clean up redundant tuyaBase usage caused by moving manuSpecificTuya3 from ZH to ZHC (@svhelge)
#11989 Gledopto GL-B-003P: support power on behaviour (@amoledwatchfaces)
#11971 Fix percentageAttribute typo (@jeremiahpslewis)
#11953 Add typing for power source (@adriweb)
#11957 BTIcino K4003C/L4003C/N4003C/NT4003C: fix state not updating (@murarustefaan)
#11958 Shelly SBBT-104CUS: fix detection (@andrei-lazarov)
#11959 Smarli. S-ZB-COV1-R251: fix endponts (@loocd)
#11947 Easyiot ZB-RS485: expose rs485_config (@xsp1989)
#31369 AVATTO TRV26: fix running_state not updating (@Koenkk)
#11931 Bosch BMCT-SLZ: missing action in decoupled mode (@KostAlex07)
#11926 Develco EMIZB-141: fix pulse configuration (@andrei-lazarov)
#11918 Müller Licht: add 404026 and 404075 whitelabel (@sebmuc99)
#11887 Namron 4512793: fix no action published (@andrei-lazarov)
#31587 Danfoss 014G2461: fix various attributes not working (@Koenkk)
#11915 Inovelli: fix mmWave target info report (@kbuck1)
#11911 Lumi ZNCLBL01LM: fix position incorrect after stop (@martinfrancois)
#11916 Move Tuya specific attributes in lightingColorCtrl cluster from ZH to ZHC - implemented in tuyaLight (@svhelge)
#11910 CTM: Add custom clusters and attributes to devices (@svhelge)
#11904 Develco EMIZB-132: Simplify and hopefully improve the power issue (@svhelge)
#11900 Improve type arguments for Ubisys (@svhelge)
#11894 Move Tuya related attributes in cluster closuresWindowCovering from ZH to ZHC (@svhelge)
#11892 Qa QAT42Z2B and QAT42Z3B: fix multi-channel scene switches (@queroautomacao)
#31183 Shelly S4PL-00416E...

Contributors

psde, DooMMasteR, and 79 other contributors

Assets 2

13 Join discussion

2.9.2

Koenkk released this 01 Apr 19:30

2.9.2

2b485a9

Improvements

#11849 Improve IKEA KAJPLATS (@andrei-lazarov)
#11802 Improve Tuya water sprinklers (@andrei-lazarov)
#11848 Netica FRZ1: support more features (@syenchuk)
#11847 SONOFF SWV-ZNE: support more features (@CubeZ2mDeveloper)
#11762 SONOFF S60ZBTPF and S60ZBTPG: various improvements (@CubeZ2mDeveloper)
#11746 NodON FPS-4-1-00: expose humidity (@KipK)
#11733 Third Reality 3RTHS0324Z: support more features (@3reality-support)
#11710 ZB-IR01: support more features (@xsp1989)
#11714 Third Reality 3RPL01084Z: support more features (@3reality-support)
#11713 Third Reality 3RWK0148Z: support more features (@3reality-support)
#11704 Tuya TS0601_switch_6_gang: expose more features (@edusouzadias)
#11705 MiCASAGasCounter: allow to set gas counter value (@IgnacioHR)
#11688 Shelly remotes: Add toggle to 4 buttons, add long press to 1 button (@andrei-lazarov)
#11678 Shelly SBBT-104CUS: Add support for double, triple, and long events (@Estrobeda)
#11682 Third Reality 3RSB02015Z: support OTA (@3reality-support)
#11614 General thermostat improvements (@jpaju)
#11625 Zemismart ZM25TQ: support lower, upper, middle limits control (@nilvanis)

Fixes

#31270 Export definition version (@andrei-lazarov)
#31234 Home Assistant: fix entity names for derived weather sensors by removing device_class (@danielpetrovic)
#31298 Match new cluster-related typing from ZH (@Nerivec)
#31273 Reintroduce onboarding improvements (@Nerivec)
#11829 Aqara DJT12LM: fix movement value (@absent42)
#11806 Move attribute develcoAlarmOffDelay from ZH to ZHC (@svhelge)
#11815 Move custom attribute operationalStatus from ZH to ZHC (lib/ubisys.ts) (@svhelge)
#11811 Move fourNoksHysteresisLow/High custom attributes from ZH to ZHC (@svhelge)
#11816 Move Legrand custom attributes from ZH to ZHC (@svhelge)
#11814 Move plugwiseCalibrateValve custom command from ZH to ZHC (@svhelge)
#11801 Move two Stelpro attributes in hvacThermostat from ZH to ZHC (@svhelge)
#11805 Move Viessmann attributes from ZH to ZHC (@svhelge)
#11835 NEO NAS-PS10B2: fix invalid presence_time value (@poeggi)
#11850 Nous E12 CO alarm: fix warm-up (@andrei-lazarov)
#11807 Nous E9: various improvements (@andrei-lazarov)
#11828 Slacky-DIY Thermostats R0C and R0D added to thermostat_manuf_name converter (@slacky1965)
#11842 Third Reality 3RAP0149BZ: remove private cluster and add dirty_level (@3reality-support)
#11844 Third Reality 3RPS01083Z: change the type of expression (@3reality-support)
#11841 Third Reality 3RSB02015Z: modify limitPosition parameter to 4100 (@3reality-support)
#11467 Tuya TS0505B_1 and TS0505B_2: apply red fix (@iotRobot)
#31470 Fix disabled devices being polled (@Koenkk)
#11793 Sunricher SR-ZGP2801K4-DIM: add new fingerprints (@chris-1243)
#11778 Move Sprut attributes from ZH to ZHC (@svhelge)
#11787 Move tradfri custom commands (genScenes) from ZH to ZHC (@svhelge)
#4950 Tuya ZY-ZTH02: update description (@Koenkk)
#31477 Ubisys: fix windowCoveringMode write failing (@Koenkk)
#11770 Danfoss 014G2461: re-work integration (@svhelge)
#11752 Move manuspecificTuya2 from ZHC to ZH (@svhelge)
#11751 Move manuSpecificTuya3Cluster from ZH to ZHC (@svhelge)
#11760 Schneider Electric WDE002497: minor improvements (@svhelge)
#11764 Third Reality 3RPL01084Z：fix airThreshold max value (@3reality-support)
#11748 Add generation to Philips remotes' description (@andrei-lazarov)
#11755 Tuya: enable polling for _TZ3000_mkhkxx1p and _TZ3000_kqvb5akv (@andrei-lazarov)
#11756 Weiser: add endpoint mapping for SmartCode 10 locks (@jtubb)
#31421 Innr SP 24X: fix toggle using physical button not reported (@Koenkk)
#11747 Move Danfoss custom attributes from ZH to ZHC (@svhelge)
#11742 Move OwonSeMetering attributes from ZH to ZHC (@svhelge)
#11717 Add Develvo specific attributes from cluster "DevelcoSeMetering" and update of Develco EMIZB-132 and (@svhelge)
#11728 MiCASAGasCounter: fix duplicate publishes (@IgnacioHR)
#11736 Move SchneiderWisercustom cluster from ZH to ZHC (@svhelge)
#11729 Move Sinope hvacThermostat attributes from ZH to ZHC (@svhelge)
#11662 Namron 4512776/4512777: fix power/energy reporting (@danielcherubini)
#11726 Schneider Electric WDE002497: various improvements (@alump)
#11732 Third Reality 3RSB02015Z: update private cluster (@3reality-support)
#11692 Inovelli: 3.05 firmware changes (@InovelliUSA)
#11706 Tuya _TZB210_qzsxaqqe: fix RGB color setting is not preserved when light turned off and back on (@Bjk8kds)
#11709 Tuya SDM01: expose data_report_duration (@script0803)
#11711 Tuya: rename TRV603 to AR331 (@Martinius79)
#31319 AduroSmart 81895: fix red color (@Koenkk)
#11691 Aqara FP300: adjust max value of humidity reporting threshold (@kpustelnik)
#11702 Elko 4523430: use modernextend instead of configure for powersource (@svhelge)
#11672 Move cluster manuSpecificLumi from ZH to ZHC (@svhelge)
#11673 Move cluster manuSpecificSiglisZigfred from ZH to ZHC (@svhelge)
#11675 Move cluster manuSpecificSmartThingsArrivalSensor from ZH to ZHC (@svhelge)
[#11674](https://git...