Iron sulfide oxidation and the chemistry of acid generation

Abstract

Acid mine drainage, produced from the oxidation of iron sulfides, often contains elevated levels of dissolved aluminum (AI), iron (Fe), and sulfate (SO₄) and low pH. Understanding the interactions of these elements associated with acid mine drainage is necessary for proper solid waste management planning. Two eastern oil shales were leached using humidity cell methods. This study used a New Albany Shale (4.6 percent pyrite) and a Chattanooga Shale (1.5 percent pyrite). The leachates from the humidity cells were filtered, and the filtrates were analyzed for total concentrations of cations and anions. After correcting for significant solution species and complexes, ion activities were calculated from total concentrations. The results show that the activities of Fe³⁺, Fe²⁺, Al³⁺, and SO₄ ²⁻ increased due to the oxidation of pyrite. Furthermore, the oxidation of pyrite resulted in a decreased pH and an increased pe+pH (redox-potential). The Fe³⁺ and Fe²⁺ activities appeared to be controlled by amorphous Fe(OH)₃ solid phase above a pH of 6.0 and below pe+pH 11.0. The Fe³⁺, Fe²⁺, and SO₄ ²⁻ activities reached saturation with respect to FeOHSO₄ solid phase between pH 3.0 and 6.0 and below pe+pH 11.0 Below a pH of 3.0 and above a pe+pH of 11.0, Fe²⁺, Fe³⁺, and SO₄ ²⁻ activities are supported by FeSO₄·7H₂O solid phase. Above a pH of 6.0, the Al³⁺ activity showed an equilibrium with amorphous Al(OH)₃ solid phase. Below pH 6.0, Al³⁺ and SO₄ ²⁻ activities are regulated by the AlOHSO₄ solid phase, irrespective of pe+pH. The results of this study suggest that under oxidizing conditions with low to high leaching potential, activities of Al and Fe can be predicted on the basis of secondary mineral formation over a wide range of pH and redox. As a result, the long-term chemistry associated with disposal environments can be largely predicted (including trace elements).