oVirt 4.4.10三节点超融合集群安装配置及集群扩容(一)

环境

oVrit版本: 4.4.10
oVirt image: https://mirrors.aliyun.com/ovirt/ovirt-4.4/iso/ovirt-node-ng-installer/4.4.10-2022030308/el8/ovirt-node-ng-installer-4.4.10-2022030308.el8.iso?spm=a2c6h.25603864.0.0.46c8a3e6ELIYzK
oVirt engine appliance: https://mirrors.aliyun.com/ovirt/ovirt-4.4/rpm/el8/x86_64/ovirt-engine-appliance-4.4-20220308105414.1.el8.x86_64.rpm?spm=a2c6h.25603864.0.0.3bfc4453NnSFms
virt-viewer: https://releases.pagure.org/virt-viewer/virt-viewer-x64-11.0-1.0.msi
virtio-win<windows磁盘驱动>: https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.229-1/

参考文档: https://www.cnovirt.com/archives/2739
交换机网口绑定请参考: https://blog.csdn.net/weixin_43667733/article/details/106363918

备注: 每个服务有2块硬盘，一块用于系统盘，一块用于glusterfs数据盘；生产环境建议系统盘做RAID 1, 两个固态硬盘做RAID 1用于GFS缓存，4块10K盘(15K SAS硬盘或SSD盘做RAID 10或RAID 5)做RAID 10；
网络环境建议最低两个1000M端口做绑定，有条件的可以上光口；注意需要先在oVirt engine管理页面做完端口绑定后再在交换机上配置物理接口端口绑定(LACP)

Node:
主机名: node100.com
IP: 192.168.5.100
子网掩码: 255.255.255.0
网关: 192.168.5.1

主机名: node101.com
IP: 192.168.5.101
子网掩码: 255.255.255.0
网关: 192.168.5.1

主机名: node102.com
IP: 192.168.5.102
子网掩码: 255.255.255.0
网关: 192.168.5.1

Engine<以虚拟机运行在node上>:
主机名: engine103.com
IP: 192.168.5.103
子网掩码: 255.255.255.0
网关: 192.168.5.1

操作步骤

1. oVirt节点安装请参考https://www.cnovirt.com/archives/2739，注意不需要更新系统。
2. 在3台node主机上设置hosts解析

[root@node100 yum.repos.d]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

192.168.5.100 node100.com
192.168.5.101 node101.com
192.168.5.102 node102.com
192.168.5.103 engine103.com

3. 将3个node节点上的/etc/yum.repos.d/文件备份到backup目录下
   备注: /etc/yum.repos.d目录下建议为空，否则后续安装gfs时容易报错或执行过程卡住

[root@node100 yum.repos.d]# cd /etc/yum.repos.d
[root@node100 yum.repos.d]# mkdir backup && mv *.repo backup

4. 在其中一个node节点上设置到所有节点的ssh免密登录，此处在node100上操作

[root@node100 home]# ssh-keygen
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Created directory '/root/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:zblxgJtmcmXSzb1UJDZfW1H5QzUCLiXH6/Z+L3zJMvM root@node100.com
The key's randomart image is:
+---[RSA 3072]----+
|         ..+..++%|
|         o=+ o.B=|
|        o.=.+ +.o|
|         O.+ . o.|
|      . S * . . .|
|       =   *     |
|          o ... .|
|             =o+.|
|            ..*Eo|
+----[SHA256]-----+

将公钥复制到3个node节点上