8bit/16bit RLE

关注

原创最新推荐文章于 2026-07-10 16:38:53 发布 895 阅读 AI 写同款· GEO 优化 ›

FastEPD：面向ESP32-S3的并行E-Ink高性能驱动库电子墨水屏（E-Ink）作为低功耗反射式显示技术，广泛应用于电子价签、工业仪表与阅读器等嵌入式场景。其核心挑战在于刷新控制精度、内存带宽约束与硬件时序适配。基于DMA+LCD控制器协同架构的并行接口驱动，可显著提升像素吞吐率并降低CPU占用，相比GPIO模拟方案提速3–5倍。FastEPD聚焦ESP32-S3平台，通过预置硬件配置、动态色深切换（1/2/4bpp）与RLE/Delta双压缩机制，在保障波形准确加载的前提下，实现局部刷新、流式渲染与FreeRTOS任务化调度。本文深入解析其在电子价签等典型工业阅读详情

========= tech info =========

8 bit header version.

File format:

13 byte original filename, followed by

[ 8 bit header + data ][ 8 bit header + data ][ 8 bit header + data ]
etc..

header:

bit 7         : 1 if following byte is a run
bit 6 - 0     : legnth of run (max 127, min 3)

data: 1 byte : which character run consists of

*** OR ***

header:

bit 7         : 0 if following bytes are sequence
bit 6 - 0     : legnth of sequence (max 127)

data: (header AND 0x7F) bytes of data
                : data bytes copied to output stream unchanged

===============================

========= tech info =========

16 bit header version.

File format:

13 bytes : original filename, followed by:

[ 16 bit header + data ][ 16 bit header + data ][16 bit header + data ]
etc..

header:
[lo byte][hi byte] ==> turn into 16 bit int ==>

bit 15        : 1 if following byte is a run
bit 14 - 0    : length of run (max 32767, min 4)

data: 1 byte : which character run consists of

*** OR ***

header:
[lo byte][hi byte] ==> turn into 16 bit int ==>

bit 15        : 0 if following bytes are sequence
bit 14 - 0    : length of sequence (max 32767)

data: (header & 0x7FFF) bytes of data
                : data bytes copied to output stream unchanged

===============================

收录于