什么是配电室智能运维？它有哪些功能应用？

【迁移学习】域对抗迁移网络 DANN

Domain-Adversarial Training of Neural Networks

【QMIX】一种基于Value-Based多智能体算法

文章目录1. QMIX 解决了什么问题（Motivation）2. QMIX 怎样解决团队收益最大化问题（Method）2.1 算法大框架 —— 基于 AC 框架的 CTDE（Centralized Training Distributed Execution） 模式 QMIX 是一种基于 Value-Based 的多智能体强化学习算法（MARL），其基本思想来源于 Actor-Critic 与 DQN 的结合。使用中心式学习（Centralized Learning）分布式执行（Distributed

跨平台烧录实战：RKDevTool在Windows/Linux/MacOS下的统一与差异

本文详细解析了RKDevTool在Windows、Linux和macOS三大操作系统下的固件烧录实践，重点介绍了RK3576开发板的环境配置、工具链选择、烧录模式切换及常见问题解决方案，帮助开发者构建稳定可靠的跨平台烧录工作流。

保姆级教程：彻底清理Win11更新缓存并解除外设，一次搞定0xc1900101更新错误

本文提供了一套完整的Win11更新报错0xc1900101解决方案，涵盖软件环境净化和硬件设备隔离。通过终止干扰进程、重置更新组件、清理临时文件以及断开外设等步骤，有效提升更新成功率。特别强调外设驱动兼容性对解决0xc1900101错误的关键作用。

电力电子技术文章：ACOT控制模式在Buck变换器中的频率稳定性分析

本文深入分析了ACOT控制模式在Buck变换器中实现频率稳定性的原理与优势。通过对比传统COT模式，阐述了ACOT如何通过自适应调整导通时间，将开关频率锁定在设定值，从而有效应对输入电压与负载变化。文章还探讨了其在轻载DCM模式下的高效与平滑切换特性，并提供了关键的设计考量与实战指南。

hpm6750evk2开发板（四）TCP回送（1000M网口）

再接下来我们修改代码，先找到配置网速的地方，肯定是在enet的初始化函数里面，我们一个函数一个函数找，也可以用单步调试一步一步找，结果发现是在enet_init函数里面调用的rtl8211_basic_mode_default_config函数配置网速的，我们把enet_phy_port_speed_100mbps改为enet_phy_port_speed_1000mbps，重新编译运行试试。首先我们复制一份lwip_tcpecho代码，重命名为lwip_tcpecho_RGMII，如下图所示。

手把手教你学veriolg（二十六）-- Verilog CIC 滤波器设计

目录 Verilog CIC 滤波器设计1. CIC 滤波器的基本原理2. Verilog 实现3. 说明4. 测试激励5. 总结 CIC（Cascade-Integrator-Comb）滤波器是一种特殊的数字滤波器，常用于多速率信号处理中，尤其是用于信号的上采样（插值）和下采样（抽取）。CIC 滤波器的特点在于它具有简单的硬件实现、不需要乘法器（仅使用加法器和延迟元件）、且具有线性相位特性。然而，CIC 滤波器的缺点是它会产生较大的量化误差，因此在设计时需要特别注意字长的选择以避免溢出。1. CIC 滤波

机器人轨迹规划——三次样条轨迹1（基于速度的求解方法）

三次样条轨迹是利用三次样条曲线来对给定的一系列点进行插值，从而得到一个光滑的轨迹。三次样条因为每段的多项式次数最高都是三阶的，所以可以得到2阶导数连续，也就是加速度连续的轨迹。假设给定了一系列的点q0q1q2qnq0​q1​q2​...qn​，以及每个点对应的参数t0t1t2tnt0​t1​t2​...tn​，计算一条三次样条曲线sts(t)st，该曲线通过给定的点q0q1q2qnq0​q1。

WINCC7.3破解文件

WINCC7.3硬件够破解文件，有需要的下载！WINCC7.3硬件够破解文件，有需要的下载！

Camera2Demo

在Camera2 的基础上进行封装，使得Camera2一堆初始化逻辑与Activity分离，降低耦合度，完成预览拍照并保存的操作

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")

ET2012新版免狗免安装绿色软件

ET2012新版免狗免安祖昂绿色软件。，新界面，新视觉，