[Tutorial] Tiny Treasure
Tutorial : Tiny Treasure
Level : Beginner
Material (Finished size is 7 inches)
- 9pcs. Chinese Rondelle 8x6mm (Blue Alabaster)
- 8pcs. Swarovski Pearl Round 6mm. (White)
- 36pcs. Preciosa Czech bicone 4mm. (Crystal Marea 2X) Color A
- 16pcs. Swarovski bicone 4mm. (Air Blue Opal) Color B
- 11/0 Seed Beads (Miyuki Galvanized Silver #181) Color A
- 11/0 Seed Beads (Miyuki Matte Metallic Steel Blue Luster #2030) Color B
- Jumpring
- Clasp
- Monofilament Beading Thread (0.25mm). (More info about thread, check this tutorial.)
Two colors bicones and seed beads are optional. You can go with one color.
I got my materials from local shops in Bangkok, except czech bicones which I bought from beadaholique.
1.
Cut the thread around 39 inches (or 100 cm) Pick up rondelle and slide it to the center of your thread. You are now have left and right thread to work with.
* Pick up 11/0 color A, bicone A, 11/0 A, 11/0 B and 11/0 A to both threads.
2.
Pick up 6mm round. Cross both threads to this round bead (red arrow).
3.
Pick up 11/0 A, 11/0 B, 11/0 A, bicone A and 11/0 A to both threads.
Pick up rondelle, cross both threads at this bead (red arrow).
Repeat the same way from * at step 1 to step 3 until the desired length.
4.
When you get the desired length, pick up 11/0 A, bicone A and 11/0 A. Pick up 11/0 B and cross both threads at this bead (red arrow).
This is where you will add jumpring and clasp.
5.
Pass back through 11/0 A, bicone A and 11/0 A. Cross both thread at rondelle (red arrow).
6.
Pass through 11/0 A, bicone A and 11/0 A (red arrow).
Pick up 11/0 B, bicone B and 11/0 B.
Pass through 11/0 A (blue arrow), bicone A and 11/0 A
Cross both threads at rondelle (green arrow).
Repeat this step for the rest of the bracelet. When you reach the last rondelle, repeat step 4.
You can finish off the threads by weaving back into your beads. Tie double knot and weave into your beads to hide the knot before cutting off the threads.
7.
Add jumpring and clasp.
Done!
This above bracelet also weaved the same way. I just changed some beads here.
Material (Finished size is 6 inches.)
- 7pcs. Chinese Rondelle 8x6mm (Green Alabaster Half Metallic)
- 6pcs. Czech Chaton 6mm. (Light Siam 2X)
- 28pcs. Swarovski bicone 4mm. (Paparadscha 2X) Color A
- 24pcs. Swarovski bicone 4mm. (Peridot 2X) Color B
- 11/0 Seed Beads (Miyuki Duracoat Dark Gold #4203 ) Color A
- 11/0 Seed Beads (Miyuki Matte Met Sage Green Luster #2031) Color B
I got all my materials including czech chaton from local shops in Bangkok, except duracoat 11/0 which are from USA, redpanda.com
Step 2, use czech chaton instead of pearl 6mm.
Step 6, pick up bicone B, 11/0 A and bicone B.
Everything else is the same.
Have fun beading!
Level : Beginner
Material (Finished size is 7 inches)
- 9pcs. Chinese Rondelle 8x6mm (Blue Alabaster)
- 8pcs. Swarovski Pearl Round 6mm. (White)
- 36pcs. Preciosa Czech bicone 4mm. (Crystal Marea 2X) Color A
- 16pcs. Swarovski bicone 4mm. (Air Blue Opal) Color B
- 11/0 Seed Beads (Miyuki Galvanized Silver #181) Color A
- 11/0 Seed Beads (Miyuki Matte Metallic Steel Blue Luster #2030) Color B
- Jumpring
- Clasp
- Monofilament Beading Thread (0.25mm). (More info about thread, check this tutorial.)
Two colors bicones and seed beads are optional. You can go with one color.
I got my materials from local shops in Bangkok, except czech bicones which I bought from beadaholique.
1.
Cut the thread around 39 inches (or 100 cm) Pick up rondelle and slide it to the center of your thread. You are now have left and right thread to work with.
* Pick up 11/0 color A, bicone A, 11/0 A, 11/0 B and 11/0 A to both threads.
2.
Pick up 6mm round. Cross both threads to this round bead (red arrow).
3.
Pick up 11/0 A, 11/0 B, 11/0 A, bicone A and 11/0 A to both threads.
Pick up rondelle, cross both threads at this bead (red arrow).
Repeat the same way from * at step 1 to step 3 until the desired length.
4.
When you get the desired length, pick up 11/0 A, bicone A and 11/0 A. Pick up 11/0 B and cross both threads at this bead (red arrow).
This is where you will add jumpring and clasp.
5.
Pass back through 11/0 A, bicone A and 11/0 A. Cross both thread at rondelle (red arrow).
6.
Pass through 11/0 A, bicone A and 11/0 A (red arrow).
Pick up 11/0 B, bicone B and 11/0 B.
Pass through 11/0 A (blue arrow), bicone A and 11/0 A
Cross both threads at rondelle (green arrow).
Repeat this step for the rest of the bracelet. When you reach the last rondelle, repeat step 4.
You can finish off the threads by weaving back into your beads. Tie double knot and weave into your beads to hide the knot before cutting off the threads.
7.
Add jumpring and clasp.
Done!
This above bracelet also weaved the same way. I just changed some beads here.
Material (Finished size is 6 inches.)
- 7pcs. Chinese Rondelle 8x6mm (Green Alabaster Half Metallic)
- 6pcs. Czech Chaton 6mm. (Light Siam 2X)
- 28pcs. Swarovski bicone 4mm. (Paparadscha 2X) Color A
- 24pcs. Swarovski bicone 4mm. (Peridot 2X) Color B
- 11/0 Seed Beads (Miyuki Duracoat Dark Gold #4203 ) Color A
- 11/0 Seed Beads (Miyuki Matte Met Sage Green Luster #2031) Color B
I got all my materials including czech chaton from local shops in Bangkok, except duracoat 11/0 which are from USA, redpanda.com
Step 2, use czech chaton instead of pearl 6mm.
Step 6, pick up bicone B, 11/0 A and bicone B.
Everything else is the same.
Have fun beading!
